On Thu, Jul 16, 2015 at 11:22:27AM -0500, Zhi Li wrote:
> On Thu, Jul 16, 2015 at 10:50 AM, Shawn Guo <shawn...@kernel.org> wrote:
> Although cross IOMUX and IOMUXC-LPSR is rare, it will be headache if there
> are
> one boards.
>
> Some SD card, ENET have reset\wp\cd pin.
>
> pinctrl_usdhc1: usdhc1grp {
> fsl,pins = <
> MX7D_PAD_SD1_CMD__SD1_CMD 0x59
> MX7D_PAD_SD1_CLK__SD1_CLK 0x19
> MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
> MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
> MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
> MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
> MX7D_PAD_SD1_CD_B__GPIO5_IO0
> 0x59 /* CD */
> MX7D_PAD_SD1_WP__GPIO5_IO1
> 0x59 /* WP */
> MX7D_PAD_SD1_RESET_B__GPIO5_IO2
> 0x59 /* vmmc */
> >;
>
> Customer may choose below pin to IOMUX-lPSR.
>
> MX7D_PAD_SD1_CD_B__GPIO5_IO0
> MX7D_PAD_SD1_WP__GPIO5_IO1
> MX7D_PAD_SD1_RESET_B__GPIO5_IO2
>
> FEC have Phy Reset GPIO, which possibly choose IOMUX-lPSR.
I do not understand why it would be a headache. The following is what I
have in my head, and I think it's nicer and easier to implement. Most
importantly, this maps how hardware is laid out exactly, save us all
those magics and hacks.
iomuxc: iomuxc@30330000 {
compatible = "fsl,imx7d-iomuxc";
reg = <0x30330000 0x10000>;
};
iomuxc_lpsr: iomuxc-lpsr@302c0000 {
compatible = "fsl,imx7d-iomuxc-lpsr";
reg = <0x302c0000 0x10000>;
fsl,select-input-controller = <&iomuxc>;
};
&iomuxc {
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX7D_PAD_SD1_CMD__SD1_CMD 0x59
MX7D_PAD_SD1_CLK__SD1_CLK 0x19
MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
>;
};
};
&iomuxc_lpsr {
pinctrl_usdhc1_lpsr: usdhc1lpsrgrp {
fsl,pins = <
MX7D_PAD_LPSR_GPIO1_IO0__GPIO1_IO0 0x59 /* CD */
MX7D_PAD_LPSR_GPIO1_IO1__GPIO1_IO1 0x59 /* WP */
MX7D_PAD_LPSR_GPIO1_IO2__GPIO1_IO2 0x59 /* vmmc */
>;
};
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_lpsr>;
};
> It is very easy to make mistake.
> According to pin NAME macro, it is not easy to distinguish between
> IOMUX and IOMUX-LPSR.
That's easy to resolve. As I demonstrated above, having LPSR in the
macro names and putting all those LPSR pad macros in a separate header
like imx7d-lpsr-pinfunc.h would make it easy to remember.
> Internal kernel tree use two pinctrl instance.
I think this is the right approach. You should post that solution
for upstream instead.
> It will be simple if we think IOMUX and IOMUX-LPSR together, and one
> module have two group registers.
No, they are two instances of IOMUX controller from perspective of
hardware design. And Linux pinctrl subsystem is well-designed to fit
there.
Shawn
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
