This patch series brings read-only support for the On-Chip OTP cells in the i.MX23 and i.MX28 processor.
It has been a long time since V3 of this series [1]. The last version has been rejected because there was no standard interface to the OTP data. So this version bases on V7 of the new NVMEM framework [2] which required a nearly complete rewrite of the driver. [1] - http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/295228.html [2] - http://lists.infradead.org/pipermail/linux-arm-kernel/2015-July/355652.html changes in V4: - rename fsl_ocotp.c to mxs-ocotp.c - adapt driver to use NVMEM framework V7 - take care of hbus clock - increase too small timeout - implement a wait function - use defines from stmp_device.h - remove owner init - more code cleanup changes in V3: - drop write support - take care of i.MX23 which has less registers - drop unnecessary header file - move static variables into driver data - add devicetree probing - fix missing bank closing in error case - use kobj from platform device for sysfs - add SYSFS to Kconfig - add binding file - code cleanup Stefan Wahren (3): DT: nvmem: add binding for mxs-ocotp nvmem: add driver for ocotp in i.MX23 and i.MX28 mxs: enable ocotp for i.MX23 and i.MX28 .../devicetree/bindings/nvmem/mxs-ocotp.txt | 24 ++ arch/arm/boot/dts/imx23.dtsi | 6 +- arch/arm/boot/dts/imx28.dtsi | 6 +- drivers/nvmem/Kconfig | 11 + drivers/nvmem/Makefile | 1 + drivers/nvmem/mxs-ocotp.c | 252 ++++++++++++++++++++ 6 files changed, 296 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt create mode 100644 drivers/nvmem/mxs-ocotp.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
