On Wed, 22 Jul 2015, Moritz Fischer wrote:
Hi Miritz,
> Hi Alan,
>
> a couple of small things I found while reworking the Zynq version to
> match the v9 patchset:
>
> On Fri, Jul 17, 2015 at 8:51 AM, <at...@opensource.altera.com> wrote:
> > From: Alan Tull <at...@opensource.altera.com>
> >
...
> > + ret = mgr->mops->write_complete(mgr);
>
> Could we pass in flags here? This way the driver wouldn't have to keep
> track of the flags. For my case it would simplify the partial reconfig
> case.
Yes, that change will be very simple and makes sense to me.
> > +/*
> > + * FPGA Manager flags
> > + * FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported
> > + */
> > +#define FPGA_MGR_PARTIAL_RECONFIG (1)
> Could this be BIT(0) instead?
Yes, ha. That's what it should have been.
> > +
> > +/**
> > + * struct fpga_manager_ops - ops for low level fpga manager drivers
> > + * @state: returns an enum value of the FPGA's state
> > + * @write_init: prepare the FPGA to receive confuration data
> > + * @write: write count bytes of configuration data to the FPGA
> > + * @write_complete: set FPGA to operating state after writing is done
> > + * @fpga_remove: optional: Set FPGA into a specific state during driver
> > remove
> > + *
> > + * fpga_manager_ops are the low level functions implemented by a specific
> > + * fpga manager driver. The optional ones are tested for NULL before being
> > + * called, so leaving them out is fine.
> > + */
> > +struct fpga_manager_ops {
> > + enum fpga_mgr_states (*state)(struct fpga_manager *mgr);
> > + int (*write_init)(struct fpga_manager *mgr, u32 flags,
> > + const char *buf, size_t count);
> > + int (*write)(struct fpga_manager *mgr, const char *buf, size_t
> > count);
> > + int (*write_complete)(struct fpga_manager *mgr);
> See comment above, having the flags here would be very convenient for
> my usecase.
Yes
> > + void (*fpga_remove)(struct fpga_manager *mgr);
> > +};
> > +
...
>
> Overall looks pretty good. I still need to look at the bridge part,
> currently I have the resets and level shifters in the zynq-fpga
> driver,
> but maybe breaking them out makes sense.
>
> Cheers,
>
> Moritz
>
Thanks for the review. I'll probably send out a v10 next week including your
recommendations.
Alan
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
