Add an appropriate "#power-domain-cells" property to the cpg_clocks
device node, to create the CPG/MSTP Clock Domain.
Add "power-domains" properties to all device nodes for devices that are
part of the CPG/MSTP Clock Domain and can be power-managed through an
MSTP clock. This applies to most on-SoC devices, which have a
one-to-one mapping from SoC device to DT device node. Notable
exceptions are the "display" and "sound" nodes, which represent multiple
SoC devices, each having their own MSTP clocks.
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Reviewed-by: Ulf Hansson <ulf.hans...@linaro.org>
---
v4:
- Add "power-domains" properties to recently introduced jpu device
node,
- Consistently add "power-domains" properties after clock and dma
properties,
v3:
- Add "power-domains" property to recently introduced Ethernet AVB
device node,
- Use "CPG/MSTP Clock Domain" instead of "CPG Clock Domain",
v2:
- Add Reviewed-by,
- Add "power-domains" properties to recently introduced USB-DMAC
device nodes,
- Drop adding "power-domains" properties to the GIC device node, as
adding the INTC_SYS clock is postponed.
---
arch/arm/boot/dts/r8a7790.dtsi | 86 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 77 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5b2952d5c700fabe..a0b2a79cbfbdf0b4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -134,6 +134,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
};
gpio1: gpio@e6051000 {
@@ -146,6 +147,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
};
gpio2: gpio@e6052000 {
@@ -158,6 +160,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
};
gpio3: gpio@e6053000 {
@@ -170,6 +173,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
};
gpio4: gpio@e6054000 {
@@ -182,6 +186,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
};
gpio5: gpio@e6055000 {
@@ -194,6 +199,7 @@
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
};
thermal@e61f0000 {
@@ -201,6 +207,7 @@
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+ power-domains = <&cpg_clocks>;
};
timer {
@@ -218,6 +225,7 @@
<0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0x60>;
@@ -237,6 +245,7 @@
<0 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
renesas,channels-mask = <0xff>;
@@ -253,6 +262,7 @@
<0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
+ power-domains = <&cpg_clocks>;
};
dmac0: dma-controller@e6700000 {
@@ -281,6 +291,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -311,6 +322,7 @@
"ch12", "ch13", "ch14";
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <15>;
};
@@ -339,6 +351,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -367,6 +380,7 @@
"ch12";
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
clock-names = "fck";
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -378,6 +392,7 @@
0 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -389,6 +404,7 @@
0 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+ power-domains = <&cpg_clocks>;
#dma-cells = <1>;
dma-channels = <2>;
};
@@ -400,6 +416,7 @@
reg = <0 0xe6508000 0 0x40>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -410,6 +427,7 @@
reg = <0 0xe6518000 0 0x40>;
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -420,6 +438,7 @@
reg = <0 0xe6530000 0 0x40>;
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -430,6 +449,7 @@
reg = <0 0xe6540000 0 0x40>;
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -442,6 +462,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -454,6 +475,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -466,6 +488,7 @@
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -478,6 +501,7 @@
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -488,6 +512,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -500,6 +525,7 @@
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
@@ -517,6 +543,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -527,6 +554,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -537,6 +565,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -547,6 +576,7 @@
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -558,6 +588,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -569,6 +600,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -580,6 +612,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -591,6 +624,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -602,6 +636,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -613,6 +648,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -624,6 +660,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -635,6 +672,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -646,6 +684,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -657,6 +696,7 @@
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -665,6 +705,7 @@
reg = <0 0xee700000 0 0x400>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+ power-domains = <&cpg_clocks>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
@@ -676,6 +717,7 @@
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -686,6 +728,7 @@
reg = <0 0xee300000 0 0x2000>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -694,6 +737,7 @@
reg = <0 0xee500000 0 0x2000>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -702,12 +746,13 @@
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
- renesas,buswait = <4>;
- phys = <&usb0 1>;
- phy-names = "usb";
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
+ power-domains = <&cpg_clocks>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
status = "disabled";
};
@@ -718,6 +763,7 @@
#size-cells = <0>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
status = "disabled";
usb0: usb-channel@0 {
@@ -732,33 +778,37 @@
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
reg = <0 0xe6ef0000 0 0x1000>;
interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin1: video@e6ef1000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
reg = <0 0xe6ef1000 0 0x1000>;
interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin2: video@e6ef2000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
reg = <0 0xe6ef2000 0 0x1000>;
interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
vin3: video@e6ef3000 {
compatible = "renesas,vin-r8a7790";
- clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
reg = <0 0xe6ef3000 0 0x1000>;
interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -767,6 +817,7 @@
reg = <0 0xfe920000 0 0x8000>;
interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+ power-domains = <&cpg_clocks>;
renesas,has-sru;
renesas,#rpf = <5>;
@@ -779,6 +830,7 @@
reg = <0 0xfe928000 0 0x8000>;
interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+ power-domains = <&cpg_clocks>;
renesas,has-lut;
renesas,has-sru;
@@ -792,6 +844,7 @@
reg = <0 0xfe930000 0 0x8000>;
interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -805,6 +858,7 @@
reg = <0 0xfe938000 0 0x8000>;
interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+ power-domains = <&cpg_clocks>;
renesas,has-lif;
renesas,has-lut;
@@ -859,6 +913,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -869,6 +924,7 @@
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -877,6 +933,7 @@
reg = <0 0xfe980000 0 0x10300>;
interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_JPU>;
+ power-domains = <&cpg_clocks>;
};
clocks {
@@ -953,6 +1010,7 @@
clock-output-names = "main", "pll0", "pll1", "pll3",
"lb", "qspi", "sdh", "sd0", "sd1",
"z", "rcan", "adsp";
+ #power-domain-cells = <0>;
};
/* Variable factor clocks */
@@ -1343,6 +1401,7 @@
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -1356,6 +1415,7 @@
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1368,6 +1428,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1380,6 +1441,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1392,6 +1454,7 @@
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1402,6 +1465,7 @@
reg = <0 0xee000000 0 0xc00>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ power-domains = <&cpg_clocks>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
@@ -1410,10 +1474,11 @@
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <0 0>;
@@ -1444,10 +1509,11 @@
pci1: pci@ee0b0000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
- clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0 0xee0b0000 0 0xc00>,
<0 0xee0a0000 0 0x1100>;
interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
status = "disabled";
bus-range = <1 1>;
@@ -1465,6 +1531,7 @@
compatible = "renesas,pci-r8a7790";
device_type = "pci";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
@@ -1517,6 +1584,7 @@
interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
+ power-domains = <&cpg_clocks>;
status = "disabled";
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
