On Mon, Aug 03, 2015 at 04:22:58PM +0100, Punit Agrawal wrote:
> Setup a thermal zone driven by the SoC temperature sensor on Juno
> r0. Create passive trip points and bind them to cpufreq cooling
> devices that support the power extensions.
Hi Punit,
>
> Signed-off-by: Punit Agrawal <punit.agra...@arm.com>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Liviu Dudau <liviu.du...@arm.com>
> Cc: Sudeep Holla <sudeep.ho...@arm.com>
> ---
> arch/arm64/boot/dts/arm/juno.dts | 50
> ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/arm/juno.dts
> b/arch/arm64/boot/dts/arm/juno.dts
> index d2e67f3..664961c 100644
> --- a/arch/arm64/boot/dts/arm/juno.dts
> +++ b/arch/arm64/boot/dts/arm/juno.dts
> @@ -9,6 +9,7 @@
> /dts-v1/;
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> / {
> model = "ARM Juno development board (r0)";
> @@ -90,6 +91,8 @@
> next-level-cache = <&A57_L2>;
> clocks = <&scpi_dvfs 0>;
> cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> + #cooling-cells = <2>;
> + dynamic-power-coefficient = <530>;
The Documentation/devicetree/bindings/thermal/thermal.txt document describes
two additional
required properties, cooling-min-state and cooling-max-state which are missing
here.
> };
>
> A57_1: cpu@1 {
> @@ -100,6 +103,8 @@
> next-level-cache = <&A57_L2>;
> clocks = <&scpi_dvfs 0>;
> cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> + #cooling-cells = <2>;
> + dynamic-power-coefficient = <530>;
> };
>
> A53_0: cpu@100 {
> @@ -110,6 +115,8 @@
> next-level-cache = <&A53_L2>;
> clocks = <&scpi_dvfs 1>;
> cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> + #cooling-cells = <2>;
> + dynamic-power-coefficient = <140>;
> };
>
> A53_1: cpu@101 {
> @@ -120,6 +127,8 @@
> next-level-cache = <&A53_L2>;
> clocks = <&scpi_dvfs 1>;
> cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> + #cooling-cells = <2>;
> + dynamic-power-coefficient = <140>;
> };
>
> A53_2: cpu@102 {
> @@ -130,6 +139,8 @@
> next-level-cache = <&A53_L2>;
> clocks = <&scpi_dvfs 1>;
> cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> + #cooling-cells = <2>;
> + dynamic-power-coefficient = <140>;
> };
>
> A53_3: cpu@103 {
> @@ -140,6 +151,8 @@
> next-level-cache = <&A53_L2>;
> clocks = <&scpi_dvfs 1>;
> cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
> + #cooling-cells = <2>;
> + dynamic-power-coefficient = <140>;
> };
>
> A57_L2: l2-cache0 {
> @@ -167,5 +180,42 @@
> <&A53_3>;
> };
>
> + thermal-zones {
> + soc_thermal {
> + polling-delay = <1000>;
> + polling-delay-passive = <100>;
> + sustainable-power = <2500>;
> +
> + thermal-sensors = <&scpi_sensors0 3>;
> +
> + trips {
> + threshold: trip-point@0 {
You also need a reg= property if you have the @index thing.
Best regards,
Liviu
> + temperature = <55000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + target: trip-point@1 {
> + temperature = <65000>;
> + hysteresis = <1000>;
> + type = "passive";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&target>;
> + cooling-device = <&A53_0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + contribution = <2048>;
> + };
> + map1 {
> + trip = <&target>;
> + cooling-device = <&A57_0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + contribution = <1024>;
> + };
> +
> + };
> + };
> + };
> +
> #include "juno-base.dtsi"
> };
> --
> 2.1.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
