Hi,
On Friday 07 August 2015 06:00 PM, Chunfeng Yun wrote:
> support usb3.0 phy of mt65xx SoCs
>
> Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
change $subject to phy:
> ---
> drivers/phy/Kconfig | 9 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-mt65xx-usb3.c | 467
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 477 insertions(+)
> create mode 100644 drivers/phy/phy-mt65xx-usb3.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index c0e6ede..019cf8b 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -193,6 +193,15 @@ config PHY_HIX5HD2_SATA
> help
> Support for SATA PHY on Hisilicon hix5hd2 Soc.
>
> +config PHY_MT65XX_USB3
> + tristate "Mediatek USB3.0 PHY Driver"
> + depends on ARCH_MEDIATEK && OF
> + select GENERIC_PHY
> + help
> + Say 'Y' here to add support for Mediatek USB3.0 PHY driver
> + for mt65xx SoCs. it supports two usb2.0 ports and
> + one usb3.0 port.
> +
> config PHY_SUN4I_USB
> tristate "Allwinner sunxi SoC USB PHY driver"
> depends on ARCH_SUNXI && HAS_IOMEM && OF
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index f344e1b..3ceff2a 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_TI_PIPE3) +=
> phy-ti-pipe3.o
> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> +obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
> new file mode 100644
> index 0000000..6835bff
> --- /dev/null
> +++ b/drivers/phy/phy-mt65xx-usb3.c
.
.
<snip>
.
.
> +static struct phy *mt65xx_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
> + struct mt65xx_phy_instance *instance = NULL;
> + struct device_node *phy_np = args->np;
> + struct resource res;
> + int index;
> + int ret;
> +
> + if (args->args_count != 1) {
> + dev_err(dev, "invalid number of cells in 'phy' property\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + for (index = 0; index < u3phy->nphys; index++)
> + if (phy_np == u3phy->phys[index]->phy->dev.of_node) {
> + instance = u3phy->phys[index];
> + break;
> + }
> +
> + if (!instance) {
> + dev_err(dev, "failed to find appropriate phy\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + instance->type = args->args[0];
> +
> + if (!(instance->type == PHY_TYPE_USB2 ||
> + instance->type == PHY_TYPE_USB3)) {
> + dev_err(dev, "unsupported device type: %d\n", instance->type);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + ret = of_address_to_resource(phy_np, 0, &res);
> + if (ret) {
> + dev_err(dev, "failed to get address resource, err-%d
> (index-%d)\n",
> + ret, instance->index);
> + return ERR_PTR(-EINVAL);
> + }
This should be done in probe itself.
> +
> + instance->port_base = devm_ioremap_resource(&instance->phy->dev, &res);
> + if (IS_ERR(instance->port_base)) {
> + dev_err(dev, "failed to remap sif regs\n");
> + return instance->port_base;
> + }
This too should be done in probe.
> +
> + return instance->phy;
> +}
> +
> +static struct phy_ops mt65xx_u3phy_ops = {
> + .init = mt65xx_phy_init,
> + .power_on = mt65xx_phy_power_on,
> + .power_off = mt65xx_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int mt65xx_u3phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct device_node *child_np;
> + struct phy_provider *phy_provider;
> + struct resource *sif_res;
> + struct mt65xx_u3phy *u3phy;
> + int port;
> +
> + u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
> + if (!u3phy)
> + return -ENOMEM;
> +
> + u3phy->nphys = of_get_child_count(np);
> + u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
> + sizeof(*u3phy->phys), GFP_KERNEL);
> + if (!u3phy->phys)
> + return -ENOMEM;
> +
> + u3phy->dev = dev;
> + platform_set_drvdata(pdev, u3phy);
> +
> + sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
> + if (IS_ERR(u3phy->sif_base)) {
> + dev_err(dev, "failed to remap sif regs\n");
> + return PTR_ERR(u3phy->sif_base);
> + }
> +
> + u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
> + if (IS_ERR(u3phy->u3phya_ref)) {
> + dev_err(dev, "error to get u3phya_ref\n");
> + return PTR_ERR(u3phy->u3phya_ref);
> + }
> +
> + port = 0;
> + for_each_child_of_node(np, child_np) {
> + struct mt65xx_phy_instance *instance;
> + struct phy *phy;
> +
> + instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
> + if (!instance)
> + return -ENOMEM;
> +
> + u3phy->phys[port] = instance;
> +
> + phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create phy\n");
> + return PTR_ERR(phy);
> + }
> + instance->phy = phy;
> + instance->index = port;
'index' here is not used anywhere.
> + phy_set_drvdata(phy, instance);
> + port++;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
> + if (IS_ERR(phy_provider)) {
> + dev_err(dev, "Failed to register phy provider\n");
> + return PTR_ERR(phy_provider);
> + }
> +
> + return u3phy_clk_enable(u3phy);
Can't we clk enable in phy_init or phy-power_on where it is actually needed.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
