On Thu, Aug 20, 2015 at 02:19:45PM -0000, Michal Suchanek wrote:
> The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over
> 1MHz SPI bus takes way longer than that. Calculate the timeout from the
> actual time the transfer is supposed to take and multiply by 2 for good
> measure.
>
> Signed-off-by: Michal Suchanek <hramr...@gmail.com>
> ---
> drivers/spi/spi-sun4i.c | 10 +++++++++-
> drivers/spi/spi-sun6i.c | 10 +++++++++-
> 2 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
> index fbb0a4d..48532ec 100644
> --- a/drivers/spi/spi-sun4i.c
> +++ b/drivers/spi/spi-sun4i.c
> @@ -170,6 +170,7 @@ static int sun4i_spi_transfer_one(struct spi_master
> *master,
> {
> struct sun4i_spi *sspi = spi_master_get_devdata(master);
> unsigned int mclk_rate, div, timeout;
> + unsigned int start, end, tx_time;
> unsigned int tx_len = 0;
> int ret = 0;
> u32 reg;
> @@ -279,9 +280,16 @@ static int sun4i_spi_transfer_one(struct spi_master
> *master,
> reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
> sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
>
> + tx_time = max_t(int, tfr->len * 8 * 2 / (speed / 1000), 100);
> + start = jiffies;
> timeout = wait_for_completion_timeout(&sspi->done,
> - msecs_to_jiffies(1000));
> + msecs_to_jiffies(tx_time));
> + end = jiffies;
> if (!timeout) {
> + dev_warn(&master->dev,
> + "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
> + dev_name(&spi->dev), tfr->len, speed,
> + jiffies_to_msecs(end - start), tx_time);Timeout already contains the number of jiffies elapsed (and I'm not sure anyone reading that message would get that the last number is actually the maximum timeout). Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
signature.asc
Description: Digital signature
