On Tuesday 25 August 2015 01:25 PM, Lee Jones wrote:
On Tue, 25 Aug 2015, Vaibhav Hiremath wrote:Update header file with required macros for 32KHz buffered clock output of 88PM800 family of device. These macros will be used in clk provider driver. Signed-off-by: Vaibhav Hiremath <vaibhav.hirem...@linaro.org> --- include/linux/mfd/88pm80x.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 122cfd2..0215d5f 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -91,6 +91,7 @@ enum { /* Referance and low power registers */ #define PM800_LOW_POWER1 (0x20) #define PM800_LOW_POWER2 (0x21) +#define PM800_LOW_POWER2_XO_LJ_EN BIT(5)Some people add an extra space for register bits, which I quite like. So: #define SOME_REGISTER_ADDRESS 0x123 #define SOME_BIT_VALUE BIT(4) Feel free to use it, or not.#define PM800_LOW_POWER_CONFIG3 (0x22) #define PM800_LDOBK_FREEZE BIT(7) @@ -138,6 +139,13 @@ enum { #define PM800_ALARM BIT(5) #define PM800_RTC1_USE_XO BIT(7) +#define PM800_32K_OUTX_SEL_MASK 0x3 +/* 32KHz clk output sel mode */ +#define PM800_32K_OUTX_SEL_ZERO 0x0 +#define PM800_32K_OUTX_SEL_INT_32KHZ 0x1 +#define PM800_32K_OUTX_SEL_XO_32KHZ 0x2 +#define PM800_32K_OUTX_SEL_HIZ 0x3 + /* Regulator Control Registers: BUCK1,BUCK5,LDO1 have DVC */ /* buck registers */ @@ -208,6 +216,10 @@ enum { #define PM800_PMOD_MEAS1 0x52 #define PM800_PMOD_MEAS2 0x53 +/* Oscillator control */ +#define PM800_OSC_CNTRL1 0x50 +#define PM800_OSC_CNTRL1_OSC_FREERUN_EN BIT(1)0x50 goes before 0x52 (and 0x51 if it's there).
Will reorder in next version. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
