With the previous patch ("rk3288: pull up cts lines") this is redundant,
I sent that patch for the same reason this existed here, so the lines don't
wiggle randomly when disconnected.
Signed-off-by: Alexandru M Stan <ams...@chromium.org>
---
Changes in v2:
- Restrict changes only to cts pin, leave rts alone
- CC people with the firefly board
- New patch removing redundant pullup code from veyron
- cover letter
arch/arm/boot/dts/rk3288-veyron.dtsi | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi
b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 2fa7a0d..2b5d2e2 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -543,18 +543,6 @@
};
};
- /*
- * On Marvell-based hardware this is a no-connect. Make sure we enable
- * the pullup so that the line doesn't float. The pullup shouldn't
- * hurt on Broadcom-based hardware since the other side is actively
- * driving this signal. As proof: we've already got a pullup on RX.
- */
- uart0 {
- uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
- };
- };
-
write-protect {
fw_wp_ap: fw-wp-ap {
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
--
2.5.0.457.gab17608
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
