On Tue, Sep 08, 2015 at 07:12:34PM -0500, Andreas Dannenberg wrote: > This patch adds support to enable/disable some device specific features > through device properties at boot time or sysfs properties at runtime > depending on whether they should be accessible during runtime or not. > The use of those features is be optional however they might be helpful > in certain scenarios: > > * High-impedance mode enable/disable (through sysfs r/w) > * Sysoff enable/disable (through sysfs r/w) > * 2X Timer enable/disable (through "ti,safety-timer-2x-enable" dev > property) > > If not explicitly modified those settings are left at their device- > specific power-on defaults. Refer to the respectice device datasheets > for more information: > > http://www.ti.com/product/bq24250 > http://www.ti.com/product/bq24251 > http://www.ti.com/product/bq24257 > > Signed-off-by: Andreas Dannenberg <[email protected]>
I'm OK with adding these properties, but I'll wait for your explanation on the mutex patch since I really don't think you need it, except for protecting chip state data. laurentiu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
