On 10/09/15 08:29, Jonas Gorski wrote:
> Add required binding support to probe through device tree.
>
> Use the compatible instead of the resource size for identifiying the
> block type, and allow reducing the number of cs lines through OF.
This looks good to me, since this builds on top of your other 6 patches,
the end-result might be different, especially if we end-up using
platform_device_id as suggested. Other than that:
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
Thanks for doing this!
>
> Signed-off-by: Jonas Gorski <j...@openwrt.org>
> ---
> drivers/spi/spi-bcm63xx.c | 56
> +++++++++++++++++++++++++++++++++++------------
> 1 file changed, 42 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
> index 42f33bc..ec094b1 100644
> --- a/drivers/spi/spi-bcm63xx.c
> +++ b/drivers/spi/spi-bcm63xx.c
> @@ -26,6 +26,7 @@
> #include <linux/completion.h>
> #include <linux/err.h>
> #include <linux/pm_runtime.h>
> +#include <linux/of.h>
>
> /* BCM 6338/6348 SPI core */
> #define SPI_6348_RSET_SIZE 64
> @@ -465,6 +466,12 @@ static const unsigned long bcm6358_spi_reg_offsets[] = {
> [SPI_MSG_DATA_SIZE] = SPI_6358_MSG_DATA_SIZE,
> };
>
> +static const struct of_device_id bcm63xx_spi_of_match[] = {
> + { .compatible = "brcm,bcm6348-spi", .data = &bcm6348_spi_reg_offsets },
> + { .compatible = "brcm,bcm6358-spi", .data = &bcm6358_spi_reg_offsets },
> + { },
> +};
> +
> static int bcm63xx_spi_probe(struct platform_device *pdev)
> {
> struct resource *r;
> @@ -474,6 +481,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
> struct clk *clk;
> struct bcm63xx_spi *bs;
> int ret;
> + u32 num_cs = BCM63XX_SPI_MAX_CS;
>
> irq = platform_get_irq(pdev, 0);
> if (irq < 0) {
> @@ -516,27 +524,46 @@ static int bcm63xx_spi_probe(struct platform_device
> *pdev)
> goto out_err;
> }
>
> - master->bus_num = BCM63XX_SPI_BUS_NUM;
> - master->num_chipselect = BCM63XX_SPI_MAX_CS;
> master->transfer_one_message = bcm63xx_spi_transfer_one;
> master->mode_bits = MODEBITS;
> master->bits_per_word_mask = SPI_BPW_MASK(8);
> master->auto_runtime_pm = true;
>
> - switch (resource_size(r)) {
> - case SPI_6348_RSET_SIZE:
> - bs->reg_offsets = bcm6348_spi_reg_offsets;
> - break;
> - case SPI_6358_RSET_SIZE:
> - bs->reg_offsets = bcm6358_spi_reg_offsets;
> - break;
> - default:
> - ret = -EINVAL;
> - dev_err(dev, "unsupported register size: %i\n",
> - resource_size(r));
> - goto out_err;
> + if (dev->of_node) {
> + const struct of_device_id *match;
> +
> + match = of_match_node(bcm63xx_spi_of_match, dev->of_node);
> + if (!match) {
> + ret = -EINVAL;
> + goto out_err;
> + }
> + bs->reg_offsets = match->data;
> + master->dev.of_node = dev->of_node;
> + of_property_read_u32(dev->of_node, "num-cs", &num_cs);
> + if (num_cs > BCM63XX_SPI_MAX_CS) {
> + dev_warn(dev, "unsupported number of cs (%i), reducing
> to 8\n",
> + num_cs);
> + num_cs = BCM63XX_SPI_MAX_CS;
> + }
> + } else {
> + master->bus_num = BCM63XX_SPI_BUS_NUM;
> +
> + switch (resource_size(r)) {
> + case SPI_6348_RSET_SIZE:
> + bs->reg_offsets = bcm6348_spi_reg_offsets;
> + break;
> + case SPI_6358_RSET_SIZE:
> + bs->reg_offsets = bcm6358_spi_reg_offsets;
> + break;
> + default:
> + ret = -EINVAL;
> + dev_err(dev, "unsupported register size: %i\n",
> + resource_size(r));
> + goto out_err;
> + }
> }
>
> + master->num_chipselect = num_cs;
> bs->msg_type_shift = bs->reg_offsets[SPI_MSG_TYPE_SHIFT];
> bs->msg_ctl_width = bs->reg_offsets[SPI_MSG_CTL_WIDTH];
> bs->fifo_size = bs->reg_offsets[SPI_MSG_DATA_SIZE];
> @@ -621,6 +648,7 @@ static struct platform_driver bcm63xx_spi_driver = {
> .driver = {
> .name = "bcm63xx-spi",
> .pm = &bcm63xx_spi_pm_ops,
> + .of_match_table = bcm63xx_spi_of_match,
> },
> .probe = bcm63xx_spi_probe,
> .remove = bcm63xx_spi_remove,
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
