This patch adds basic support for bq24250 and bq24251 which are very
similar to the bq24257 the driver was originally written for. Basic
support means the ability to select a device through Kconfig, DT and
ACPI, an instance variable allowing to check which chip is active, and
the reporting back of the selected device through the
POWER_SUPPLY_PROP_MODEL_NAME power supply sysfs property.

This patch by itself is not sufficient to actually use those two added
devices in a real-world setting due to some feature differences which
are addressed by other patches in this series.

Signed-off-by: Andreas Dannenberg <dannenb...@ti.com>
---
 drivers/power/Kconfig           |  5 +++--
 drivers/power/bq24257_charger.c | 46 +++++++++++++++++++++++++++++++++++++++--
 2 files changed, 47 insertions(+), 4 deletions(-)

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index f8758d6..7ecd9b6 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -397,12 +397,13 @@ config CHARGER_BQ24190
          Say Y to enable support for the TI BQ24190 battery charger.
 
 config CHARGER_BQ24257
-       tristate "TI BQ24257 battery charger driver"
+       tristate "TI BQ24250/24251/24257 battery charger driver"
        depends on I2C
        depends on GPIOLIB || COMPILE_TEST
        depends on REGMAP_I2C
        help
-         Say Y to enable support for the TI BQ24257 battery charger.
+         Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 
battery
+         chargers.
 
 config CHARGER_BQ24735
        tristate "TI BQ24735 battery charger support"
diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c
index 5859bc7..1b3ddfb 100644
--- a/drivers/power/bq24257_charger.c
+++ b/drivers/power/bq24257_charger.c
@@ -13,6 +13,10 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
+ * Datasheets:
+ * http://www.ti.com/product/bq24250
+ * http://www.ti.com/product/bq24251
+ * http://www.ti.com/product/bq24257
  */
 
 #include <linux/module.h>
@@ -41,6 +45,18 @@
 
 #define BQ24257_ILIM_SET_DELAY         1000    /* msec */
 
+enum bq2425x_chip {
+       BQ24250,
+       BQ24251,
+       BQ24257,
+};
+
+static const char *const bq2425x_chip_name[] = {
+       "bq24250",
+       "bq24251",
+       "bq24257",
+};
+
 enum bq24257_fields {
        F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT,                       /* REG 1 */
        F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE,  /* REG 2 */
@@ -71,6 +87,8 @@ struct bq24257_device {
        struct device *dev;
        struct power_supply *charger;
 
+       enum bq2425x_chip chip;
+
        struct regmap *rmap;
        struct regmap_field *rmap_fields[F_MAX_FIELDS];
 
@@ -249,6 +267,10 @@ static int bq24257_power_supply_get_property(struct 
power_supply *psy,
                val->strval = BQ24257_MANUFACTURER;
                break;
 
+       case POWER_SUPPLY_PROP_MODEL_NAME:
+               val->strval = bq2425x_chip_name[bq->chip];
+               break;
+
        case POWER_SUPPLY_PROP_ONLINE:
                val->intval = state.power_good;
                break;
@@ -569,6 +591,7 @@ static int bq24257_hw_init(struct bq24257_device *bq)
 
 static enum power_supply_property bq24257_power_supply_props[] = {
        POWER_SUPPLY_PROP_MANUFACTURER,
+       POWER_SUPPLY_PROP_MODEL_NAME,
        POWER_SUPPLY_PROP_STATUS,
        POWER_SUPPLY_PROP_ONLINE,
        POWER_SUPPLY_PROP_HEALTH,
@@ -666,6 +689,7 @@ static int bq24257_probe(struct i2c_client *client,
 {
        struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
        struct device *dev = &client->dev;
+       const struct acpi_device_id *acpi_id;
        struct bq24257_device *bq;
        int ret;
        int i;
@@ -682,6 +706,18 @@ static int bq24257_probe(struct i2c_client *client,
        bq->client = client;
        bq->dev = dev;
 
+       if (ACPI_HANDLE(dev)) {
+               acpi_id = acpi_match_device(dev->driver->acpi_match_table,
+                                           &client->dev);
+               if (!acpi_id) {
+                       dev_err(dev, "Failed to match ACPI device\n");
+                       return -ENODEV;
+               }
+               bq->chip = (enum bq2425x_chip)acpi_id->driver_data;
+       } else {
+               bq->chip = (enum bq2425x_chip)id->driver_data;
+       }
+
        mutex_init(&bq->lock);
 
        bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
@@ -823,19 +859,25 @@ static const struct dev_pm_ops bq24257_pm = {
 };
 
 static const struct i2c_device_id bq24257_i2c_ids[] = {
-       { "bq24257", 0 },
+       { "bq24250", BQ24250 },
+       { "bq24251", BQ24251 },
+       { "bq24257", BQ24257 },
        {},
 };
 MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
 
 static const struct of_device_id bq24257_of_match[] = {
+       { .compatible = "ti,bq24250", },
+       { .compatible = "ti,bq24251", },
        { .compatible = "ti,bq24257", },
        { },
 };
 MODULE_DEVICE_TABLE(of, bq24257_of_match);
 
 static const struct acpi_device_id bq24257_acpi_match[] = {
-       {"BQ242570", 0},
+       { "BQ242500", BQ24250 },
+       { "BQ242510", BQ24251 },
+       { "BQ242570", BQ24257 },
        {},
 };
 MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to