On 2015年08月28日 16:59, Heiko Stuebner wrote:
Hi,
Am Freitag, 28. August 2015, 13:46:46 schrieb Xing Zheng:
Initial release for rk3036, node definitions rk3036 sdk board.
Signed-off-by: Xing Zheng<zhengx...@rock-chips.com>
---
Changes in v1: None
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/rk3036-sdk.dts | 362
++++++++++++++++++++++++++++++++++++++ 2 files changed, 363 insertions(+)
as Eddie already said, please split into two files ... just look at the other
Rockchip socs for inspiration :-)
Done.
create mode 100644 arch/arm/boot/dts/rk3036-sdk.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6d7cec1..7014a3b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
rk3066a-rayeager.dtb \
+ rk3036-sdk.dtb \
rk3188-radxarock.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
diff --git a/arch/arm/boot/dts/rk3036-sdk.dts
b/arch/arm/boot/dts/rk3036-sdk.dts new file mode 100644
index 0000000..0149c9a
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-sdk.dts
@@ -0,0 +1,362 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include<dt-bindings/gpio/gpio.h>
+#include<dt-bindings/interrupt-controller/irq.h>
+#include<dt-bindings/interrupt-controller/arm-gic.h>
+#include<dt-bindings/pinctrl/rockchip.h>
+#include<dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "rockchip,rk3036";
+
+ interrupt-parent =<&gic>;
+
+ aliases {
+ serial0 =&uart0;
+ serial1 =&uart1;
+ serial2 =&uart2;
+ };
+
+ memory {
+ reg =<0x60000000 0x40000000>;
missing
device_type = "memory";
Done.
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts =<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
missing interrupt-affinity to map irq->cpu_core ?
Done.
+ };
+
+ cpus {
+ #address-cells =<1>;
+ #size-cells =<0>;
+ //enable-method = "rockchip,rk3066-smp";
please don't leave commented code around
Done.
+
+ cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg =<0xf00>;
+ operating-points =<
+ /* KHz uV */
+ 816000 1000000
+ >;
+ #cooling-cells =<2>; /* min followed by max */
+ clock-latency =<40000>;
+ clocks =<&cru ARMCLK>;
+ resets =<&cru SRST_CORE0>;
+ };
+ cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg =<0xf01>;
+ resets =<&cru SRST_CORE1>;
+ };
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells =<1>;
+ #size-cells =<1>;
+ ranges;
+
+ pdma: pdma@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg =<0x20078000 0x4000>;
+ interrupts =<GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells =<1>;
+ clocks =<&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
indentation of the dma controller looks wrong
In my opnion, it seems ok, where is it wrong?
Thanks.
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency =<24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells =<0>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts =<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
please provide all 4 irqs (secure, non-secure, virtual and hypervisor)
Done, but I don't quite understand.
+ clock-frequency =<24000000>;
+ always-on;
+ };
+
+ cru: clock-controller@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg =<0x20000000 0x1000>;
+ rockchip,grf =<&grf>;
+ #clock-cells =<1>;
+ #reset-cells =<1>;
+ assigned-clocks =<&cru PLL_GPLL>;
+ assigned-clock-rates =<594000000>;
+ };
+
+ uart0: serial@20060000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg =<0x20060000 0x100>;
+ interrupts =<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift =<2>;
+ reg-io-width =<4>;
+ clock-frequency =<24000000>;
+ clocks =<&cru SCLK_UART0>,<&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 =<&uart0_xfer&uart0_cts&uart0_rts>;
+ };
+
+ uart1: serial@20064000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg =<0x20064000 0x100>;
+ interrupts =<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift =<2>;
+ reg-io-width =<4>;
+ clock-frequency =<24000000>;
+ clocks =<&cru SCLK_UART1>,<&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 =<&uart1_xfer>;
+ };
+
+ uart2: serial@20068000 {
+ compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+ reg =<0x20068000 0x100>;
+ interrupts =<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift =<2>;
+ reg-io-width =<4>;
+ clock-frequency =<24000000>;
+ clocks =<&cru SCLK_UART2>,<&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 =<&uart2_xfer>;
+ };
+
+ pwm0: pwm@20050000 {
+ compatible = "rockchip,rk2928-pwm";
+ reg =<0x20050000 0x10>;
+ #pwm-cells =<3>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pwm0_pin>;
+ clocks =<&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm@20050010 {
+ compatible = "rockchip,rk2928-pwm";
+ reg =<0x20050010 0x10>;
+ #pwm-cells =<3>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pwm1_pin>;
+ clocks =<&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm@20050020 {
+ compatible = "rockchip,rk2928-pwm";
+ reg =<0x20050020 0x10>;
+ #pwm-cells =<3>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pwm2_pin>;
+ clocks =<&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm@20050030 {
+ compatible = "rockchip,rk2928-pwm";
+ reg =<0x20050030 0x10>;
+ #pwm-cells =<2>;
+ pinctrl-names = "default";
+ pinctrl-0 =<&pwm3_pin>;
+ clocks =<&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ sram@10080000 {
+ compatible = "mmio-sram";
+ reg =<0x10080000 0x2000>;
+ map-exec;
+ };
+
+ gic: interrupt-controller@10139000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells =<3>;
+ #address-cells =<0>;
+
+ reg =<0x10139000 0x1000>,
+ <0x1013a000 0x1000>;
please also provide the vgic registers and interrupt
Done, but I checked GIC_SPEC.pdf and I'm not sure it is correct...
+ };
+
+ grf: syscon@20008000 {
+ compatible = "rockchip,rk3036-grf", "syscon";
+ reg =<0x20008000 0x1000>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3036-pinctrl";
+ rockchip,grf =<&grf>;
+ #address-cells =<1>;
+ #size-cells =<1>;
+ ranges;
+
+ gpio0: gpio0@2007c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2007c000 0x100>;
please use a space after the "=" in "reg =<..."
Done.
+ interrupts =<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks =<&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells =<2>;
+
+ interrupt-controller;
+ #interrupt-cells =<2>;
+ };
+
+ gpio1: gpio1@20080000 {
+ compatible = "rockchip,gpio-bank";
+ reg =<0x20080000 0x100>;
+ interrupts =<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks =<&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells =<2>;
+
+ interrupt-controller;
+ #interrupt-cells =<2>;
+ };
+
+ gpio2: gpio2@20084000 {
+ compatible = "rockchip,gpio-bank";
+ reg =<0x20084000 0x100>;
+ interrupts =<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks =<&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells =<2>;
+
+ interrupt-controller;
+ #interrupt-cells =<2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength =<12>;
+ };
The rk3036 iomux does not have a per-pin drive-strength setting it seems, so
at the moment the pinctrl driver does not support changing the drive-strength,
so this node should probably be dropped. It seems unused anyway.
Done.
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =<0 16 RK_FUNC_1&pcfg_pull_none>,
+ <0 17 RK_FUNC_1&pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =<0 18 RK_FUNC_1&pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =<0 19 RK_FUNC_1&pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =<2 22 RK_FUNC_1&pcfg_pull_none>,
+ <2 23 RK_FUNC_1&pcfg_pull_none>;
+ };
+ /* no rts / cts for uart1 */
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins =<1 18 RK_FUNC_2
&pcfg_pull_none>, +<1 19
RK_FUNC_2&pcfg_pull_none>; + };
+ /* no rts / cts for uart2 */
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =<0 0 RK_FUNC_2&pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =<0 1 RK_FUNC_2&pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =<0 1 2&pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins =<0 27 1&pcfg_pull_none>;
+ };
+ };
+ };
+};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
