On Wed, Sep 09, 2015 at 02:30:44PM +0200, Gary Bisson wrote:
> Hi all,
>
> This series is a follow-up to the previous series that added LCD display
> support.
> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html
The MAINTAINERS file has been updated for a couple of release cycles
with my new email address. Please stop sending patches to
shawn....@linaro.org, and resend any patches you want me to collect to
shawn...@kernel.org.
Shawn
>
> This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as
> adding two boards: Nitrogen6_Max and Nit6xlite.
>
> It also takes care of updating the licenses to be GPLv2/X11.
>
> The series has been tested against linux-next tag next-20150909.
>
> Note that imx_v6_v7_defconfig has been used with the following additions:
> CONFIG_TOUCHSCREEN_EDT_FT5X06=y
> CONFIG_I2C_MUX_GPIO=y
> CONFIG_RTC_DRV_M41T80=y
>
> Modifications:
> v2->v3:
> - Rename nodes to general class of device as suggested by Philipp and Russell.
> - Remove useless wakeup-gpio field for edt,ft5x06 touchscreen
> - Add missing muxing for interrupt GPIO
> - Rebased on next-20150909
> v1->v2:
> - Add Boundary Devices Inc. to vendor prefixes
> - Relicense devices trees to GPLv2/X11 as suggested by Fabio for:
> - Nitrogen6x
> - SabreLite
> - Nit6xLite
> - Nitrogen6_MAX
> - Change manufacturer to Boundary Devices as suggested by Fabio for:
> - Nitrogen6x
> - Nit6xLite
> - Nitrogen6_MAX
> - Fixed missing macros for gpio/irq values as suggested by Philipp.
> - Rebased on next-20150908
>
> Regards,
> Gary
>
> Gary Bisson (9):
> ARM: dts: imx6dql-nitrogen6x: add touchscreen support
> ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
> ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11
> ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11
> of: Add Boundary Devices Inc. vendor prefix
> ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices
> ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices
> ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
> ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
>
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 ++
> arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 44 +-
> arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 +-
> arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++
> arch/arm/boot/dts/imx6q-nitrogen6x.dts | 44 +-
> arch/arm/boot/dts/imx6q-sabrelite.dts | 40 +-
> ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++----
> arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873
> +++++++++++++++++++++
> arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 111 ++-
> arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 +-
> 12 files changed, 1523 insertions(+), 170 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts
> create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts
> copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi}
> (50%)
> create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
>
> --
> 2.5.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
