On Mon, 28 Sep 2015, Cyrille Pitchen wrote:
> This patch documents the DT bindings for the Atmel Flexcom which will be
> introduced by sama5d2x SoCs. These bindings will be used by the actual
> Flexcom driver to be sent in another patch.
>
> Signed-off-by: Cyrille Pitchen <cyrille.pitc...@atmel.com>
> Acked-by: Boris Brezillon <boris.brezil...@free-electrons.com>
> Acked-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
> Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com>
> ---
> .../devicetree/bindings/mfd/atmel-flexcom.txt | 63
> ++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
Applied, thanks.
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> new file mode 100644
> index 000000000000..692300117c64
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> @@ -0,0 +1,63 @@
> +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
> +
> +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
> +controller and an USART. Only one function can be used at a time and is
> chosen
> +at boot time according to the device tree.
> +
> +Required properties:
> +- compatible: Should be "atmel,sama5d2-flexcom"
> +- reg: Should be the offset/length value for Flexcom
> dedicated
> + I/O registers (without USART, TWI or SPI registers).
> +- clocks: Should be the Flexcom peripheral clock from PMC.
> +- #address-cells: Should be <1>
> +- #size-cells: Should be <1>
> +- ranges: Should be one range for the full I/O register region
> + (including USART, TWI and SPI registers).
> +- atmel,flexcom-mode: Should be one of the following values:
> + - <1> for USART
> + - <2> for SPI
> + - <3> for I2C
> +
> +Required child:
> +A single available child device of type matching the "atmel,flexcom-mode"
> +property.
> +
> +The phandle provided by the clocks property of the child is the same as one
> for
> +the Flexcom parent.
> +
> +For other properties, please refer to the documentations of the respective
> +device:
> +- ../serial/atmel-usart.txt
> +- ../spi/spi_atmel.txt
> +- ../i2c/i2c-at91.txt
> +
> +Example:
> +
> +flexcom@f8034000 {
> + compatible = "atmel,sama5d2-flexcom";
> + reg = <0xf8034000 0x200>;
> + clocks = <&flx0_clk>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8034000 0x800>;
> + atmel,flexcom-mode = <2>;
> +
> + spi@400 {
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flx0_default>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&flx0_clk>;
> + clock-names = "spi_clk";
> + atmel,fifo-size = <32>;
> +
> + mtd_dataflash@0 {
> + compatible = "atmel,at25f512b";
> + reg = <0>;
> + spi-max-frequency = <20000000>;
> + };
> + };
> +};
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
