Add documentation for the PXA frambuffer devicetree binding.
Signed-off-by: Robert Jarzmik <robert.jarz...@free.fr>
Cc: Jean-Christophe Plagniol-Villard <plagn...@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkei...@ti.com>
Cc: linux-fb...@vger.kernel.org
---
.../devicetree/bindings/video/marvell,pxafb.txt | 75 ++++++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/marvell,pxafb.txt
diff --git a/Documentation/devicetree/bindings/video/marvell,pxafb.txt
b/Documentation/devicetree/bindings/video/marvell,pxafb.txt
new file mode 100644
index 000000000000..489055bf3c57
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/marvell,pxafb.txt
@@ -0,0 +1,75 @@
+PXA LCDC Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible :
+ "marvell,pxa2xx-fb",
+- reg : Should contain 1 register ranges(address and length).
+ Can contain an additional register range(address and length)
+ for fixed framebuffer memory. Useful for dedicated memories.
+- interrupts : framebuffer controller interrupt
+- display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+ This should be in the board dts.
+- default-mode: a videomode within the display with timing parameters
+ as specified below.
+- bits-per-pixel: pixel data bus width of the LCD panel
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+- enable-transparency-bit: if framebuffer colorspace reserves a bit for
+ transparency
+- enable-greyscale-cmap: true if palette is a grayscale based instead of color
+
+Example:
+
+ fb0: video@0x44000000 {
+ compatible = "marvell,pxa2xx-fb";
+ reg = <0x44000000 0x10000>;
+ interrupts = <17>;
+ clocks = <&clks CLK_LCD>;
+ interrupts = <23>;
+ display = <&display0>;
+ status = "okay";
+
+ enable-transparency-bit = <0>;
+ enable-greyscale-cmap = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+PXA LCDC Display
+-----------------------------------------------------
+Required properties (as per of_videomode_helper):
+ - lcd-type: either "mono-stn", "mono-dstn", "color-stn", "color-dstn",
+ "color-tft", "smart-panel"
+ - bits-per-pixel: LCD data bus width
+
+Optional properties (as per of_videomode_helper):
+ - power-regulator: power supply regulator to the LCD to power it on or off
+
+Example:
+ display0: display {
+ lcd-type = "color-tft";
+ bits-per-pixel = <16>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 240p {
+ /* 240x320p24 */
+ clock-frequency = <4545000>;
+ hactive = <240>;
+ vactive = <320>;
+ hfront-porch = <4>;
+ hback-porch = <6>;
+ hsync-len = <4>;
+ vback-porch = <5>;
+ vfront-porch = <3>;
+ vsync-len = <2>;
+ pixelclk-active = <0>;
+ de-active = <1>;
+ };
+ };
+ };
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
