On Sun, Oct 04, 2015 at 06:05:59PM +0200, H. Nikolaus Schaller wrote:
> From: Marek Belisko <ma...@goldelico.com>
>
> Code was found at:
> https://android.googlesource.com/kernel/tegra/+/a90856a6626d502d42c6e7abccbdf9d730b36270%5E%21/#F1
>
> Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
> [Fixed minor typos + add channels list to documentation]
> Signed-off-by: Marek Belisko <ma...@goldelico.com>
> ---
> .../devicetree/bindings/iio/adc/palmas-gpadc.txt | 46 +++++++++++++++++++
> drivers/iio/adc/palmas_gpadc.c | 52 +++++++++++++++++++---
> 2 files changed, 93 insertions(+), 5 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
> b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
> new file mode 100644
> index 0000000..2149afe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt
> @@ -0,0 +1,46 @@
> +* Palmas general purpose ADC IP block devicetree bindings
> +
> +Channels list:
> + 0 battery type
> + 1 battery temp NTC (optional current source)
> + 2 GP
> + 3 temp (with ext. diode, optional current source)
> + 4 GP
> + 5 GP
> + 6 VBAT_SENSE
> + 7 VCC_SENSE
> + 8 Backup Battery voltage
> + 9 external charger (VCHG)
> + 10 VBUS
> + 11 DC-DC current probe (how does this work?)
> + 12 internal die temp
> + 13 internal die temp
> + 14 USB ID pin voltage
> + 15 test network
> +
> +Required properties:
> +- compatible : Must be "ti,palmas-gpadc".
> +
> +Optional sub-nodes:
> +ti,channel0-current-microamp: Channel 0 current in uA.
> + Values are rounded to derive 0uA, 5uA, 15uA, 20uA.
> +ti,channel3-current-microamp: Channel 3 current in uA.
> + Valid are rounded to derive 0uA, 10uA, 400uA, 800uA.
It's only possible to configure channels 0 and 3 in this manner?
> +ti,enable-extended-delay: Enable extended delay.
What is this? When would I select it? Why does it belong in the DT
rather than being a runtime option?
> +Example:
> +
> +pmic {
> + compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
> + ...
> + gpadc {
> + compatible = "ti,palmas-gpadc";
> + interrupts = <18 0
> + 16 0
> + 17 0>;
> + ti,channel0-current-microamp = <5>;
> + ti,channel3-current-microamp = <10>;
> + };
> + };
> + ...
> +};
I thought you needed #iio-cells for encoding the channel?
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
