Hi Bharat,
On 06/10/15 16:44, Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
>
> Signed-off-by: Bharat Kumar Gogada <bhara...@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgum...@xilinx.com>
> ---
> Added interrupt-map, interrupt-map-mask properties
> ---
> .../devicetree/bindings/pci/xilinx-nwl-pcie.txt | 56 ++
> drivers/pci/host/Kconfig | 9 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-xilinx-nwl.c | 1029
> ++++++++++++++++++++
> 4 files changed, 1095 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> create mode 100644 drivers/pci/host/pcie-xilinx-nwl.c
>
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> new file mode 100644
> index 0000000..81006ab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> @@ -0,0 +1,56 @@
> +* Xilinx NWL PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- compatible: Should contain "xlnx,nwl-pcie-2.11"
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> + interrupt source. The value must be 1.
> +- reg: Should contain Bridge, PCIe Controller registers location,
> + configuration sapce, and length
> +- reg-names: Must include the following entries:
> + "breg": bridge registers
> + "pcireg": PCIe controller registers
> + "cfg": configuration space region
> +- device_type: must be "pci"
> +- interrupts: Should contain NWL PCIe interrupt
> +- interrupt-names: Must include the following entries:
> + "misc": interrupt asserted when miscellaneous is recieved
> + "intx": interrupt that is asserted when an legacy interrupt is received
> + "msi_1, msi_0": interrupt asserted when msi is recieved
> +- interrupt-map-mask and interrupt-map: standard PCI properties to define the
> + mapping of the PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is not
> + supported by hardware)
> + Please refer to the standard PCI bus binding document for a more
> + detailed explanation
> +
> +Optional properties:
> +- xlnx,msi-fifo: To enable MSI FIFO mode
> + - This feature can be used to queue multiple MSI interrupts
> +
> +Example:
> +++++++++
> +nwl_pcie: pcie@fd0e0000 {
> + compatible = "xlnx,nwl-pcie-2.11";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + device_type = "pci";
> + interrupt-parent = <&gic>;
> + interrupts = < 0 118 4
> + 0 116 4
> + 0 115 4 // MSI_1 [63...32]
> + 0 114 4 >; // MSI_0 [31...0]
> + interrupt-names = "misc", "intx", "msi_1", "msi_0";
> + interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 116 0x4
> + 0x0 0x0 0x0 0x2 &gic 0x0 116 0x4
> + 0x0 0x0 0x0 0x3 &gic 0x0 116 0x4
> + 0x0 0x0 0x0 0x4 &gic 0x0 116 0x4>;
> + reg = <0x0 0xfd0e0000 0x1000
> + 0x0 0xfd480000 0x1000
> + 0x0 0xE0000000 0x1000000>;
> + reg-names = "breg", "pcireg", "cfg";
> + ranges = <0x02000000 0x00000000 0xE1000000 0x00000000 0xE1000000 0
> 0x0F000000>;
> +};
Please move this to a separate patch. This is big enough, and hard
enough to review.
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index c132bdd..7f5f35e 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -15,6 +15,15 @@ config PCI_MVEBU
> depends on ARCH_MVEBU || ARCH_DOVE
> depends on OF
>
> +config PCIE_XILINX_NWL
> + bool "NWL PCIe Core && PCI_MSI"
> + depends on ARCH_ZYNQMP
> + help
> + Say 'Y' here if you want kernel to support for Xilinx
> + NWL PCIe controller.The controller can act as Root Port
> + or End Point.The current option selection will only
Add a space after the dot.
> + support root port enabling.
> +
> config PCIE_DW
> bool
>
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 140d66f..6a56df7 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
> obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> +obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
> obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
> obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
> obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> diff --git a/drivers/pci/host/pcie-xilinx-nwl.c
> b/drivers/pci/host/pcie-xilinx-nwl.c
> new file mode 100644
> index 0000000..ff25ec1
> --- /dev/null
> +++ b/drivers/pci/host/pcie-xilinx-nwl.c
> @@ -0,0 +1,1029 @@
> +/*
> + * PCIe host controller driver for NWL PCIe Bridge
> + * Based on pci-xilinx.c, pci-tegra.c
> + *
> + * (C) Copyright 2014 - 2015, Xilinx, Inc.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +/* Bridge core config registers */
> +#define BRCFG_PCIE_RX0 0x00000000
> +#define BRCFG_PCIE_RX1 0x00000004
> +#define BRCFG_AXI_MASTER 0x00000008
> +#define BRCFG_PCIE_TX 0x0000000C
> +#define BRCFG_INTERRUPT 0x00000010
> +#define BRCFG_RAM_DISABLE0 0x00000014
> +#define BRCFG_RAM_DISABLE1 0x00000018
> +#define BRCFG_PCIE_RELAXED_ORDER 0x0000001C
> +#define BRCFG_PCIE_RX_MSG_FILTER 0x00000020
> +
> +/* Attribute registers */
> +#define NWL_ATTRIB_100 0x00000190
> +
> +/* Egress - Bridge translation registers */
> +#define E_BREG_CAPABILITIES 0x00000200
> +#define E_BREG_STATUS 0x00000204
> +#define E_BREG_CONTROL 0x00000208
> +#define E_BREG_BASE_LO 0x00000210
> +#define E_BREG_BASE_HI 0x00000214
> +#define E_ECAM_CAPABILITIES 0x00000220
> +#define E_ECAM_STATUS 0x00000224
> +#define E_ECAM_CONTROL 0x00000228
> +#define E_ECAM_BASE_LO 0x00000230
> +#define E_ECAM_BASE_HI 0x00000234
> +
> +/* Ingress - address translations */
> +#define I_MSII_CAPABILITIES 0x00000300
> +#define I_MSII_CONTROL 0x00000308
> +#define I_MSII_BASE_LO 0x00000310
> +#define I_MSII_BASE_HI 0x00000314
> +
> +#define I_ISUB_CONTROL 0x000003E8
> +#define SET_ISUB_CONTROL BIT(0)
> +/* Rxed msg fifo - Interrupt status registers */
> +#define MSGF_MISC_STATUS 0x00000400
> +#define MSGF_MISC_MASK 0x00000404
> +#define MSGF_LEG_STATUS 0x00000420
> +#define MSGF_LEG_MASK 0x00000424
> +#define MSGF_MSI_STATUS_LO 0x00000440
> +#define MSGF_MSI_STATUS_HI 0x00000444
> +#define MSGF_MSI_MASK_LO 0x00000448
> +#define MSGF_MSI_MASK_HI 0x0000044C
> +#define MSGF_RX_FIFO_POP 0x00000484
> +#define MSGF_RX_FIFO_TYPE 0x00000488
> +#define MSGF_RX_FIFO_ADDRLO 0x00000490
> +#define MSGF_RX_FIFO_ADDRHI 0x00000494
> +#define MSGF_RX_FIFO_DATA 0x00000498
> +
> +/* Msg filter mask bits */
> +#define CFG_ENABLE_PM_MSG_FWD BIT(1)
> +#define CFG_ENABLE_INT_MSG_FWD BIT(2)
> +#define CFG_ENABLE_ERR_MSG_FWD BIT(3)
> +#define CFG_ENABLE_SLT_MSG_FWD BIT(5)
> +#define CFG_ENABLE_VEN_MSG_FWD BIT(7)
> +#define CFG_ENABLE_OTH_MSG_FWD BIT(13)
> +#define CFG_ENABLE_VEN_MSG_EN BIT(14)
> +#define CFG_ENABLE_VEN_MSG_VEN_INV BIT(15)
> +#define CFG_ENABLE_VEN_MSG_VEN_ID GENMASK(31, 16)
> +#define CFG_ENABLE_MSG_FILTER_MASK (CFG_ENABLE_PM_MSG_FWD | \
> + CFG_ENABLE_INT_MSG_FWD | \
> + CFG_ENABLE_ERR_MSG_FWD | \
> + CFG_ENABLE_SLT_MSG_FWD | \
> + CFG_ENABLE_VEN_MSG_FWD | \
> + CFG_ENABLE_OTH_MSG_FWD | \
> + CFG_ENABLE_VEN_MSG_EN | \
> + CFG_ENABLE_VEN_MSG_VEN_INV | \
> + CFG_ENABLE_VEN_MSG_VEN_ID)
> +
> +/* Misc interrupt status mask bits */
> +#define MSGF_MISC_SR_RXMSG_AVAIL BIT(0)
> +#define MSGF_MISC_SR_RXMSG_OVER BIT(1)
> +#define MSGF_MISC_SR_SLAVE_ERR BIT(4)
> +#define MSGF_MISC_SR_MASTER_ERR BIT(5)
> +#define MSGF_MISC_SR_I_ADDR_ERR BIT(6)
> +#define MSGF_MISC_SR_E_ADDR_ERR BIT(7)
> +
> +#define MSGF_MISC_SR_PCIE_CORE GENMASK(18, 16)
> +#define MSGF_MISC_SR_PCIE_CORE_ERR GENMASK(31, 20)
> +
> +#define MSGF_MISC_SR_MASKALL (MSGF_MISC_SR_RXMSG_AVAIL | \
> + MSGF_MISC_SR_RXMSG_OVER | \
> + MSGF_MISC_SR_SLAVE_ERR | \
> + MSGF_MISC_SR_MASTER_ERR | \
> + MSGF_MISC_SR_I_ADDR_ERR | \
> + MSGF_MISC_SR_E_ADDR_ERR | \
> + MSGF_MISC_SR_PCIE_CORE | \
> + MSGF_MISC_SR_PCIE_CORE_ERR)
> +
> +/* Message rx fifo type mask bits */
> +#define MSGF_RX_FIFO_TYPE_MSI (1)
> +#define MSGF_RX_FIFO_TYPE_TYPE GENMASK(1, 0)
> +
> +/* Legacy interrupt status mask bits */
> +#define MSGF_LEG_SR_INTA BIT(0)
> +#define MSGF_LEG_SR_INTB BIT(1)
> +#define MSGF_LEG_SR_INTC BIT(2)
> +#define MSGF_LEG_SR_INTD BIT(3)
> +#define MSGF_LEG_SR_MASKALL (MSGF_LEG_SR_INTA | MSGF_LEG_SR_INTB | \
> + MSGF_LEG_SR_INTC | MSGF_LEG_SR_INTD)
> +
> +/* MSI interrupt status mask bits */
> +#define MSGF_MSI_SR_LO_MASK BIT(0)
> +#define MSGF_MSI_SR_HI_MASK BIT(0)
> +
> +#define MSII_PRESENT BIT(0)
> +#define MSII_ENABLE BIT(0)
> +#define MSII_STATUS_ENABLE BIT(15)
> +
> +/* Bridge config interrupt mask */
> +#define BRCFG_INTERRUPT_MASK BIT(0)
> +#define BREG_PRESENT BIT(0)
> +#define BREG_ENABLE BIT(0)
> +#define BREG_ENABLE_FORCE BIT(1)
> +
> +/* E_ECAM status mask bits */
> +#define E_ECAM_PRESENT BIT(0)
> +#define E_ECAM_SR_WR_PEND BIT(16)
> +#define E_ECAM_SR_RD_PEND BIT(0)
> +#define E_ECAM_SR_MASKALL (E_ECAM_SR_WR_PEND | E_ECAM_SR_RD_PEND)
> +#define E_ECAM_CR_ENABLE BIT(0)
> +#define E_ECAM_SIZE_LOC GENMASK(20, 16)
> +#define E_ECAM_SIZE_SHIFT 16
> +#define ECAM_BUS_LOC_SHIFT 20
> +#define ECAM_DEV_LOC_SHIFT 12
> +#define NWL_ECAM_VALUE_DEFAULT 12
> +#define NWL_ECAM_SIZE_MIN 4096
> +
> +#define ATTR_UPSTREAM_FACING BIT(6)
> +#define CFG_DMA_REG_BAR GENMASK(2, 0)
> +
> +/* msgf_rx_fifo_pop bits */
> +#define MSGF_RX_FIFO_POP_POP BIT(0)
> +
> +#define INT_PCI_MSI_NR (2 * 32)
> +
> +/* Readin the PS_LINKUP */
> +#define PS_LINKUP_OFFSET 0x00000238
> +#define PCIE_PHY_LINKUP_BIT BIT(0)
> +#define PHY_RDY_LINKUP_BIT BIT(1)
> +#define PCIE_USER_LINKUP 0
> +#define PHY_RDY_LINKUP 1
> +#define LINKUP_ITER_CHECK 5
> +
> +/* PCIE Message Request */
> +#define TX_PCIE_MSG 0x00000620
> +#define TX_PCIE_MSG_CNTL 0x00000004
> +#define TX_PCIE_MSG_SPEC_LO 0x00000008
> +#define TX_PCIE_MSG_SPEC_HI 0x0000000C
> +#define TX_PCIE_MSG_DATA 0x00000010
> +
> +#define MSG_BUSY_BIT BIT(8)
> +#define MSG_EXECUTE_BIT BIT(0)
> +#define MSG_DONE_BIT BIT(16)
> +#define MSG_DONE_STATUS_BIT (BIT(25) | BIT(24))
> +#define RANDOM_DIGIT 0x11223344
> +#define PATTRN_SSLP_TLP 0x01005074
> +
> +#define EXP_CAP_BASE 0x60
> +
> +/* SSPL ERROR */
> +#define SLVERR 0x02
> +#define DECERR 0x03
> +
> +struct nwl_msi { /* struct nwl_msi - MSI information */
> + struct msi_controller chip; /* chip: MSI controller */
We're moving away from msi_controller altogether, as the kernel now has
all the necessary infrastructure to do this properly.
Please convert this driver to msi domains (see
drivers/pci/host/pci-xgene-msi.c or the gic-v2m driver as examples of
how this is being done).
> + DECLARE_BITMAP(used, INT_PCI_MSI_NR); /* used: Declare Bitmap
> + for MSI */
> + struct irq_domain *domain; /* domain: IRQ domain pointer */
> + unsigned long pages; /* pages: MSI pages */
> + struct mutex lock; /* lock: mutex lock */
> + int irq_msi0; /* irq_msi0: msi0 interrupt number */
> + int irq_msi1; /* irq_msi1: msi1 interrupt number */
> +};
[...]
> +static irqreturn_t nwl_pcie_misc_handler(int irq, void *data)
> +{
> + struct nwl_pcie *pcie = (struct nwl_pcie *)data;
> + u32 misc_stat;
> +
> + /* Checking for misc interrupts */
> + misc_stat = nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> + MSGF_MISC_SR_MASKALL;
> + if (!misc_stat)
> + return IRQ_NONE;
> +
> + if (misc_stat & MSGF_MISC_SR_RXMSG_OVER)
> + dev_err(pcie->dev, "Received Message FIFO Overflow\n");
> +
> + if (misc_stat & MSGF_MISC_SR_SLAVE_ERR)
> + dev_err(pcie->dev, "Slave error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_MASTER_ERR)
> + dev_err(pcie->dev, "Master error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_I_ADDR_ERR)
> + dev_err(pcie->dev,
> + "In Misc Ingress address translation error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_E_ADDR_ERR)
> + dev_err(pcie->dev,
> + "In Misc Egress address translation error\n");
> +
> + if (misc_stat & MSGF_MISC_SR_PCIE_CORE_ERR)
> + dev_err(pcie->dev, "PCIe Core error\n");
> +
> + if (pcie->enable_msi_fifo) {
> + if (misc_stat & MSGF_MISC_SR_RXMSG_AVAIL) {
> + u32 msg_type = nwl_bridge_readl(pcie,
> + MSGF_RX_FIFO_TYPE) &
> + MSGF_RX_FIFO_TYPE_TYPE;
> +
> + if (msg_type == MSGF_RX_FIFO_TYPE_MSI) {
> + u32 irq_msi;
> + struct nwl_msi *msi = &pcie->msi;
> + u32 msi_data = nwl_bridge_readl(pcie,
> + MSGF_RX_FIFO_DATA);
> + /* Let all ready be completed before write */
> + rmb();
> + /* POP the FIFO */
> + nwl_bridge_writel(pcie, MSGF_RX_FIFO_POP_POP,
> + MSGF_RX_FIFO_POP);
> +
> + /* Handle the msi virtual interrupt */
> + irq_msi = irq_find_mapping(msi->domain,
> + msi_data);
> +
> + if (irq_msi) {
> + if (test_bit(msi_data, msi->used))
> + generic_handle_irq(irq_msi);
> + else
> + dev_info(pcie->dev,
> + "unhandled MSI %d\n",
> + irq_msi);
No way. This implements a chained irqchip, not a normal IRQ handler. You
can't just reenter the core code like this.
Please convert this to a full chained irqchip.
> + } else {
> + dev_info(pcie->dev, "unexpected MSI\n");
> + }
> + }
> + }
> + }
> + /* Clear misc interrupt status */
> + nwl_bridge_writel(pcie, misc_stat, MSGF_MISC_STATUS);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t nwl_pcie_leg_handler(int irq, void *data)
> +{
> + struct nwl_pcie *pcie = (struct nwl_pcie *)data;
> + u32 leg_stat;
> +
> + /* Checking for legacy interrupts */
> + leg_stat = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> + MSGF_LEG_SR_MASKALL;
> + if (!leg_stat)
> + return IRQ_NONE;
> +
> + if (leg_stat & MSGF_LEG_SR_INTA)
> + dev_dbg(pcie->dev, "legacy interruptA\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTB)
> + dev_dbg(pcie->dev, "legacy interruptB\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTC)
> + dev_dbg(pcie->dev, "legacy interruptC\n");
> +
> + if (leg_stat & MSGF_LEG_SR_INTD)
> + dev_dbg(pcie->dev, "legacy interruptD\n");
> +
> + return IRQ_HANDLED;
And that's it? How useful is that? How do you make sure the line has
been lowered (if I remember well, legacy interrupts are LEVEL).
> +}
> +
> +static void __nwl_pcie_msi_handler(struct nwl_pcie *pcie,
> + unsigned long reg, u32 val)
> +{
> + struct nwl_msi *msi = &pcie->msi;
> + unsigned int offset, index;
> + int irq_msi;
> +
> + offset = find_first_bit(®, 32);
> + index = offset;
> +
> + /* Clear the interrupt */
> + nwl_bridge_writel(pcie, 1 << offset, val);
> +
> + /* Handle the msi virtual interrupt */
> + irq_msi = irq_find_mapping(msi->domain, index);
> + if (irq_msi) {
> + if (test_bit(index, msi->used))
> + generic_handle_irq(irq_msi);
> + else
> + dev_info(pcie->dev, "unhandled MSI\n");
> + } else {
> + dev_info(pcie->dev, "unexpected MSI\n");
> + }
> +}
I already commented on that, and on the need to using msi domains.
> +
> +static irqreturn_t nwl_pcie_msi_handler(int irq, void *data)
> +{
> + struct nwl_pcie *pcie = data;
> + unsigned long reg;
> + int processed = 0;
> +
> + reg = nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO);
> + if (reg) {
> + __nwl_pcie_msi_handler(pcie, reg, MSGF_MSI_STATUS_LO);
> + processed++;
> + }
> +
> + reg = nwl_bridge_readl(pcie, MSGF_MSI_STATUS_HI);
> + if (reg) {
> + __nwl_pcie_msi_handler(pcie, reg, MSGF_MSI_STATUS_HI);
> + processed++;
> + }
> +
> + return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
> +}
I think you really need to document what all these handlers are...
> +
> +static int nwl_msi_alloc(struct nwl_msi *chip)
> +{
> + int msi;
> +
> + mutex_lock(&chip->lock);
> +
> + msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR);
> + if (msi < INT_PCI_MSI_NR)
> + set_bit(msi, chip->used);
> + else
> + msi = -ENOSPC;
> +
> + mutex_unlock(&chip->lock);
> +
> + return msi;
> +}
> +
> +static void nwl_msi_free(struct nwl_msi *chip, unsigned long irq)
> +{
> + struct device *dev = chip->chip.dev;
> +
> + mutex_lock(&chip->lock);
> +
> + if (!test_bit(irq, chip->used))
> + dev_err(dev, "trying to free unused MSI#%lu\n", irq);
> + else
> + clear_bit(irq, chip->used);
> +
> + mutex_unlock(&chip->lock);
> +}
> +
> +static int nwl_msi_setup_irq(struct msi_controller *chip, struct pci_dev
> *pdev,
> + struct msi_desc *desc)
> +{
> + struct nwl_msi *msi = to_nwl_msi(chip);
> + struct msi_msg msg;
> + unsigned int irq;
> + int hwirq;
> +
> + /* currently we are not supporting MSIx */
> + if (desc->msi_attrib.is_msix)
> + return -ENOSPC;
> +
> + hwirq = nwl_msi_alloc(msi);
> + if (hwirq < 0)
> + return hwirq;
> +
> + irq = irq_create_mapping(msi->domain, hwirq);
> + if (!irq)
> + return -EINVAL;
> +
> + irq_set_msi_desc(irq, desc);
> +
> + msg.address_lo = virt_to_phys((void *)msi->pages);
> + /* 32 bit address only */
> + msg.address_hi = 0;
> + msg.data = hwirq;
> +
> + write_msi_msg(irq, &msg);
> +
> + return 0;
> +}
> +
> +static void nwl_msi_teardown_irq(struct msi_controller *chip, unsigned int
> irq)
> +{
> + struct nwl_msi *msi = to_nwl_msi(chip);
> + struct irq_data *d = irq_get_irq_data(irq);
> +
> + nwl_msi_free(msi, d->hwirq);
> +}
> +
> +static struct irq_chip nwl_msi_irq_chip = {
> + .name = "nwl_pcie:msi",
> + .irq_enable = unmask_msi_irq,
> + .irq_disable = mask_msi_irq,
> + .irq_mask = mask_msi_irq,
> + .irq_unmask = unmask_msi_irq,
> +};
All that needs to go.
> +
> +static int nwl_msi_map(struct irq_domain *domain, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_and_handler(irq, &nwl_msi_irq_chip, handle_simple_irq);
> + irq_set_chip_data(irq, domain->host_data);
> + set_irq_flags(irq, IRQF_VALID);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops msi_domain_ops = {
> + .map = nwl_msi_map,
> +};
> +
> +static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
> +{
> + struct platform_device *pdev = to_platform_device(pcie->dev);
> + struct nwl_msi *msi = &pcie->msi;
> + unsigned long base;
> + int ret;
> +
> + mutex_init(&msi->lock);
> +
> + /* Assign msi chip hooks */
> + msi->chip.dev = pcie->dev;
> + msi->chip.setup_irq = nwl_msi_setup_irq;
> + msi->chip.teardown_irq = nwl_msi_teardown_irq;
> +
> + bus->msi = &msi->chip;
> + msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> + &msi_domain_ops, &msi->chip);
> + if (!msi->domain) {
> + dev_err(&pdev->dev, "failed to create IRQ domain\n");
> + return -ENOMEM;
> + }
> +
> + /* Check for msii_present bit */
> + ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
> + if (!ret) {
> + dev_err(pcie->dev, "MSI not present\n");
> + ret = -EIO;
> + goto err;
> + }
> +
> + /* Enable MSII */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> + MSII_ENABLE, I_MSII_CONTROL);
> + if (!pcie->enable_msi_fifo)
> + /* Enable MSII status */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> + MSII_STATUS_ENABLE, I_MSII_CONTROL);
> +
> + /* setup AFI/FPCI range */
> + msi->pages = __get_free_pages(GFP_KERNEL, 0);
> + base = virt_to_phys((void *)msi->pages);
> + nwl_bridge_writel(pcie, base, I_MSII_BASE_LO);
> + nwl_bridge_writel(pcie, 0x0, I_MSII_BASE_HI);
> +
> + /* Disable high range msi interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> + /* Clear pending high range msi interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_HI) &
> + MSGF_MSI_SR_HI_MASK, MSGF_MSI_STATUS_HI);
> + /* Get msi_1 IRQ number */
> + msi->irq_msi1 = platform_get_irq_byname(pdev, "msi_1");
> + if (msi->irq_msi1 < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi1);
> + goto err;
> + }
> + /* Register msi handler */
> + ret = devm_request_irq(pcie->dev, msi->irq_msi1, nwl_pcie_msi_handler,
> + 0, nwl_msi_irq_chip.name, pcie);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to request IRQ#%d\n",
> + msi->irq_msi1);
> + goto err;
> + }
> +
> + /* Enable all high range msi interrupts */
> + nwl_bridge_writel(pcie, MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> + /* Disable low range msi interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> + /* Clear pending low range msi interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO) &
> + MSGF_MSI_SR_LO_MASK, MSGF_MSI_STATUS_LO);
> + /* Get msi_0 IRQ number */
> + msi->irq_msi0 = platform_get_irq_byname(pdev, "msi_0");
> + if (msi->irq_msi0 < 0) {
> + dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi0);
> + goto err;
> + }
> + /* Register msi handler */
> + ret = devm_request_irq(pcie->dev, msi->irq_msi0, nwl_pcie_msi_handler,
> + 0, nwl_msi_irq_chip.name, pcie);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to request IRQ#%d\n",
> + msi->irq_msi0);
> + goto err;
> + }
> + /* Enable all low range msi interrupts */
> + nwl_bridge_writel(pcie, MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> + return 0;
> +err:
> + irq_domain_remove(msi->domain);
> + return ret;
> +}
> +
> +static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
> +{
> + struct platform_device *pdev = to_platform_device(pcie->dev);
> + u32 breg_val, ecam_val, first_busno = 0;
> + int err;
> + int check_link_up = 0;
> +
> + /* Check for BREG present bit */
> + breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
> + if (!breg_val) {
> + dev_err(pcie->dev, "BREG is not present\n");
> + return breg_val;
> + }
> + /* Write bridge_off to breg base */
> + nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
> + E_BREG_BASE_LO);
> +
> + /* Enable BREG */
> + nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
> + E_BREG_CONTROL);
> +
> + /* Disable DMA channel registers */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
> + CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
> +
> + /* Enable the bridge config interrupt */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
> + BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
> + /* Enable Ingress subtractive decode translation */
> + nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
> +
> + /* Enable msg filtering details */
> + nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> + BRCFG_PCIE_RX_MSG_FILTER);
> + do {
> + err = nwl_pcie_link_up(pcie, PHY_RDY_LINKUP);
> + if (err != 1) {
> + check_link_up++;
> + if (check_link_up > LINKUP_ITER_CHECK)
> + return -ENODEV;
> + mdelay(1000);
> + }
> + } while (!err);
> +
> + /* Check for ECAM present bit */
> + ecam_val = nwl_bridge_readl(pcie, E_ECAM_CAPABILITIES) & E_ECAM_PRESENT;
> + if (!ecam_val) {
> + dev_err(pcie->dev, "ECAM is not present\n");
> + return ecam_val;
> + }
> +
> + /* Enable ECAM */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> + E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
> + /* Write ecam_value on ecam_control */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> + (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
> + E_ECAM_CONTROL);
> + /* Write phy_reg_base to ecam base */
> + nwl_bridge_writel(pcie, (u32)pcie->phys_ecam_base, E_ECAM_BASE_LO);
> +
> + /* Get bus range */
> + ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
> + pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
> + /* Write primary, secondary and subordinate bus numbers */
> + ecam_val = first_busno;
> + ecam_val |= (first_busno + 1) << 8;
> + ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
> + writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
> +
> + /* Check if PCIe link is up? */
> + pcie->link_up = nwl_pcie_link_up(pcie, PCIE_USER_LINKUP);
> + if (!pcie->link_up)
> + dev_info(pcie->dev, "Link is DOWN\n");
> + else
> + dev_info(pcie->dev, "Link is UP\n");
> +
> + /* Disable all misc interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> + /* Clear pending misc interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> + MSGF_MISC_SR_MASKALL, MSGF_MISC_STATUS);
> +
> + /* Get misc IRQ number */
> + pcie->irq_misc = platform_get_irq_byname(pdev, "misc");
> + if (pcie->irq_misc < 0) {
> + dev_err(&pdev->dev, "failed to get misc IRQ#%d\n",
> + pcie->irq_misc);
> + return pcie->irq_misc;
> + }
> + /* Register misc handler */
> + err = devm_request_irq(pcie->dev, pcie->irq_misc,
> + nwl_pcie_misc_handler, IRQF_SHARED,
> + "nwl_pcie:misc", pcie);
> + if (err) {
> + dev_err(pcie->dev, "fail to register misc IRQ#%d\n",
> + pcie->irq_misc);
> + return err;
> + }
> + /* Enable all misc interrupts */
> + nwl_bridge_writel(pcie, MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> + /* Disable all legacy interrupts */
> + nwl_bridge_writel(pcie, (u32)~MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> + /* Clear pending legacy interrupts */
> + nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> + MSGF_LEG_SR_MASKALL, MSGF_LEG_STATUS);
> + /* Get intx IRQ number */
> + pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
> + if (pcie->irq_intx < 0) {
> + dev_err(&pdev->dev, "failed to get intx IRQ#%d\n",
> + pcie->irq_intx);
> + return pcie->irq_intx;
> + }
> +
> + /* Register intx handler */
> + err = devm_request_irq(pcie->dev, pcie->irq_intx,
> + nwl_pcie_leg_handler, IRQF_SHARED,
> + "nwl_pcie:intx", pcie);
> + if (err) {
> + dev_err(pcie->dev, "fail to register intx IRQ#%d\n",
> + pcie->irq_intx);
> + return err;
> + }
> + /* Enable all legacy interrupts */
> + nwl_bridge_writel(pcie, MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> + return 0;
> +}
> +
> +static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
> + struct platform_device *pdev)
> +{
> + struct device_node *node = pcie->dev->of_node;
> + struct resource *res;
> + const char *type;
> +
> + /* Check for device type */
> + type = of_get_property(node, "device_type", NULL);
> + if (!type || strcmp(type, "pci")) {
> + dev_err(pcie->dev, "invalid \"device_type\" %s\n", type);
> + return -EINVAL;
> + }
How can this fail?
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
> + pcie->breg_base = devm_ioremap_resource(pcie->dev, res);
> + if (IS_ERR(pcie->breg_base))
> + return PTR_ERR(pcie->breg_base);
> + pcie->phys_breg_base = res->start;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcireg");
> + pcie->pcireg_base = devm_ioremap_resource(pcie->dev, res);
> + if (IS_ERR(pcie->pcireg_base))
> + return PTR_ERR(pcie->pcireg_base);
> + pcie->phys_pcie_reg_base = res->start;
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> + pcie->ecam_base = devm_ioremap_resource(pcie->dev, res);
> + if (IS_ERR(pcie->ecam_base))
> + return PTR_ERR(pcie->ecam_base);
> + pcie->phys_ecam_base = res->start;
> +
> + pcie->enable_msi_fifo = of_property_read_bool(node, "xlnx,msi-fifo");
> +
> + return 0;
> +}
> +
> +static const struct of_device_id nwl_pcie_of_match[] = {
> + { .compatible = "xlnx,nwl-pcie-2.11", },
> + {}
> +};
> +
> +static int nwl_pcie_probe(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct nwl_pcie *pcie;
> + struct pci_bus *bus;
> + int err;
> +
> + resource_size_t iobase = 0;
> + LIST_HEAD(res);
> +
> + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> + if (!pcie)
> + return -ENOMEM;
> +
> + pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
> +
> + pcie->dev = &pdev->dev;
> +
> + err = nwl_pcie_parse_dt(pcie, pdev);
> + if (err) {
> + dev_err(pcie->dev, "Parsing DT failed\n");
> + return err;
> + }
> + /* Bridge initialization */
> + err = nwl_pcie_bridge_init(pcie);
> + if (err) {
> + dev_err(pcie->dev, "HW Initalization failed\n");
> + return err;
> + }
> +
> + err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
> + if (err) {
> + pr_err("Getting bridge resources failed\n");
> + return err;
> + }
> + bus = pci_create_root_bus(&pdev->dev, 0,
> + &nwl_pcie_ops, pcie, &res);
> + if (!bus)
> + return -ENOMEM;
> +
> + /* Enable MSI */
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + err = nwl_pcie_enable_msi(pcie, bus);
> + if (err < 0) {
> + dev_err(&pdev->dev,
> + "failed to enable MSI support: %d\n",
> + err);
> + return err;
> + }
> + }
> + pci_scan_child_bus(bus);
> + pci_assign_unassigned_bus_resources(bus);
> + pci_bus_add_devices(bus);
> + platform_set_drvdata(pdev, pcie);
> +
> + return 0;
> +}
> +
> +static int nwl_pcie_remove(struct platform_device *pdev)
> +{
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static struct platform_driver nwl_pcie_driver = {
> + .driver = {
> + .name = "nwl-pcie",
> + .of_match_table = nwl_pcie_of_match,
> + },
> + .probe = nwl_pcie_probe,
> + .remove = nwl_pcie_remove,
> +};
> +module_platform_driver(nwl_pcie_driver);
> +
> +MODULE_AUTHOR("Xilinx, Inc");
> +MODULE_DESCRIPTION("NWL PCIe driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.1
Overall, I think it would make sense to split the PCIe controller driver
and the MSI controller (in separate files as well).
Please keep me posted on the updates.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
