Hi Arnaud,
On sam., oct. 10 2015, Arnaud Ebalard <a...@natisbad.org> wrote:
> This cosmetic patch reorder nodes under internal-regs by increasing
> address order, as epxected.
>
> Signed-off-by: Arnaud Ebalard <a...@natisbad.org>
Applied on mvebu/dt with Andrew acked-by
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86
> +++++++++++++-------------
> 1 file changed, 43 insertions(+), 43 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> index 85b2f87c0b8a..d72a69d97ba2 100644
> --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
> @@ -94,54 +94,11 @@
> status = "disabled";
> };
>
> - /* Two rear eSATA ports */
> - sata@a0000 {
> - nr-ports = <2>;
> - status = "okay";
> - };
> -
> - serial@12000 {
> - status = "okay";
> - };
> -
> - mdio {
> - phy0: ethernet-phy@0 { /* Marvell 88E1318 */
> - reg = <0>;
> - };
> -
> - phy1: ethernet-phy@1 { /* Marvell 88E1318 */
> - reg = <1>;
> - };
> - };
> -
> - ethernet@70000 {
> - status = "okay";
> - phy = <&phy0>;
> - phy-mode = "rgmii-id";
> - };
> -
> - ethernet@74000 {
> - status = "okay";
> - phy = <&phy1>;
> - phy-mode = "rgmii-id";
> - };
> -
> - /* Front USB 2.0 port */
> - usb@50000 {
> - status = "okay";
> - };
> -
> i2c@11000 {
> compatible = "marvell,mv64xxx-i2c";
> clock-frequency = <400000>;
> status = "okay";
>
> - isl12057: isl12057@68 {
> - compatible = "isil,isl12057";
> - reg = <0x68>;
> - isil,irq2-can-wakeup-machine;
> - };
> -
> /* Controller for rear fan #1 of 3 (Protechnic
> * MGT4012XB-O20, 8000RPM) near eSATA port */
> g762_fan1: g762@3e {
> @@ -178,6 +135,49 @@
> compatible = "gmt,g751";
> reg = <0x4c>;
> };
> +
> + isl12057: isl12057@68 {
> + compatible = "isil,isl12057";
> + reg = <0x68>;
> + isil,irq2-can-wakeup-machine;
> + };
> + };
> +
> + serial@12000 {
> + status = "okay";
> + };
> +
> + /* Front USB 2.0 port */
> + usb@50000 {
> + status = "okay";
> + };
> +
> + mdio {
> + phy0: ethernet-phy@0 { /* Marvell 88E1318 */
> + reg = <0>;
> + };
> +
> + phy1: ethernet-phy@1 { /* Marvell 88E1318 */
> + reg = <1>;
> + };
> + };
> +
> + ethernet@70000 {
> + status = "okay";
> + phy = <&phy0>;
> + phy-mode = "rgmii-id";
> + };
> +
> + ethernet@74000 {
> + status = "okay";
> + phy = <&phy1>;
> + phy-mode = "rgmii-id";
> + };
> +
> + /* Two rear eSATA ports */
> + sata@a0000 {
> + nr-ports = <2>;
> + status = "okay";
> };
>
> nand@d0000 {
> --
> 2.5.3
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
