On Tue, Oct 13, 2015 at 03:17:36PM -0700, Ray Jui wrote:
> Shouldn't the device tree binding document go with the other patch
> series since both the binding document and drivers are merged by Michael
> or Stephen?
> 
> On 10/13/2015 2:22 PM, Jon Mason wrote:
> > Document the device tree bindings for Broadcom Northstar Plus
> > architecture based clock controller
> > 
> > Signed-off-by: Jon Mason <jonma...@broadcom.com>
> > ---
> >  .../bindings/clock/brcm,iproc-clocks.txt           | 30 
> > ++++++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt 
> > b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
> > index da8d9bb..b3c3e9d 100644
> > --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
> > +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
> > @@ -130,3 +130,33 @@ These clock IDs are defined in:
> >      ch3_unused mipipll          4       BCM_CYGNUS_MIPIPLL_CH3_UNUSED
> >      ch4_unused mipipll          5       BCM_CYGNUS_MIPIPLL_CH4_UNUSED
> >      ch5_unused mipipll          6       BCM_CYGNUS_MIPIPLL_CH5_UNUSED
> > +
> > +Northstar and Northstar Plus
> > +------
> > +PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
> > + "brcm,nsp-armpll"
> > + "brcm,nsp-genpll"
> > + "brcm,nsp-lcpll0"
> 
> So the current clock driver also supports NS? That will be nice and that
> indicates all the clock related registers/offsets are exactly the same
> between NS and NSP?

Yes.  The register offsets are different, but everything else is
identical.

> 
> > +
> > +The following table defines the set of PLL/clock index and ID for 
> > Northstar and
> > +Northstar Plus.  These clock IDs are defined in:
> > +    "include/dt-bindings/clock/bcm-nsp.h"
> > +
> > +    Clock  Source          Index   ID
> > +    ---            -----           -----   ---------
> > +    crystal        N/A             N/A     N/A
> > +
> > +    armpll crystal         N/A     N/A
> > +
> > +    genpll crystal         0       BCM_NSP_GENPLL
> > +    phy            genpll          1       BCM_NSP_GENPLL_PHY_CLK
> > +    ethernetclk    genpll          2       BCM_NSP_GENPLL_ENET_SW_CLK
> > +    usbclk genpll          3       BCM_NSP_GENPLL_USB_PHY_REF_CLK
> > +    iprocfast      genpll          4       BCM_NSP_GENPLL_IPROCFAST_CLK
> > +    sata1  genpll          5       BCM_NSP_GENPLL_SATA1_CLK
> > +    sata2  genpll          6       BCM_NSP_GENPLL_SATA2_CLK
> > +
> > +    lcpll0 crystal         0       BCM_NSP_LCPLL0
> > +    pcie_phy       lcpll0          1       BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
> > +    sdio   lcpll0          2       BCM_NSP_LCPLL0_SDIO_CLK
> > +    ddr_phy        lcpll0          3       BCM_NSP_LCPLL0_DDR_PHY_CLK
> > 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to