The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 PMIC.
Signed-off-by: Andrew F. Davis <a...@ti.com>
---
.../devicetree/bindings/gpio/gpio-tps65086.txt | 17 ++++++++
Documentation/devicetree/bindings/mfd/tps65086.txt | 46 ++++++++++++++++++++++
.../bindings/regulator/tps65086-regulator.txt | 36 +++++++++++++++++
3 files changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
create mode 100644
Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
new file mode 100644
index 0000000..15e4063
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65086.txt
@@ -0,0 +1,17 @@
+* TPS65086 GPO Controller bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65086-gpio".
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number
+ and the second cell is used to specify flags.
+ See include/dt-bindings/gpio/gpio.h for possible
+ values.
+
+Example:
+
+ gpio4: tps65086_gpio {
+ compatible = "ti,tps65086-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt
b/Documentation/devicetree/bindings/mfd/tps65086.txt
new file mode 100644
index 0000000..4b6aeb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -0,0 +1,46 @@
+* TPS65086 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65086".
+ - reg : Slave address.
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt
controller.
+ - #interrupt-cells : The number of cells to describe an IRQ, this
+ should be 2. The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger
+ masks from ../interrupt-controller/interrupts.txt.
+
+Additional nodes defined in:
+ - Regulators : ../regulator/tps65086-regulator.txt.
+ - GPIO : ../gpio/gpio-tps65086.txt.
+
+Example:
+
+ pmic: tps65086@5e {
+ compatible = "ti,tps65086";
+ reg = <0x5e>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ compatible = "ti,tps65086-regulator";
+
+ buck1 {
+ regulator-name = "vcc1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ ti,regulator-decay;
+ ti,regulator-step-size-25mv;
+ };
+ };
+
+ gpio4: tps65086_gpio {
+ compatible = "ti,tps65086-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
new file mode 100644
index 0000000..023cd73
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65086-regulator.txt
@@ -0,0 +1,36 @@
+* TPS65086 regulator bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65086-regulator".
+ - list of regulators provided by this controller, must be named
+ after their hardware counterparts: buck[1-6], ldoa[1-3], swa1,
+ swb[1-2], and vtt.
+
+Optional properties:
+ - Per-regulator optional properties are defined in regulator.txt
+ - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6].
+ Set this if the regulator is factory
+ set with a 25mv step voltage mapping.
+ - ti,regulator-decay : This is applicable for buck[1-6].
+ Set this if the output needs to decay,
+ default is for the output to slew down.
+
+Example:
+
+ regulators {
+ compatible = "ti,tps65086-regulator";
+
+ buck1 {
+ regulator-name = "vcc1";
+ regulator-min-microvolt = <1600000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ ti,regulator-step-size-25mv;
+ ti,regulator-decay;
+ };
+
+ swa1 {
+ regulator-name = "ls1";
+ regulator-boot-on;
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
