On R8A7790, GPIO banks 1 and 2 are missing pins 30 and 31. Correct the
"gpio-ranges" properties of the corresponding device nodes.
Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
---
This patch is against the 'renesas-devel-20151019-v4.3-rc6' of Simon Horman's
'renesas.git' repo.
arch/arm/boot/dts/r8a7790.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Index: renesas/arch/arm/boot/dts/r8a7790.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7790.dtsi
+++ renesas/arch/arm/boot/dts/r8a7790.dtsi
@@ -143,7 +143,7 @@
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 32 32>;
+ gpio-ranges = <&pfc 0 32 30>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
@@ -156,7 +156,7 @@
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
- gpio-ranges = <&pfc 0 64 32>;
+ gpio-ranges = <&pfc 0 64 30>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
