On 24/11/15 10:59, Adriana Reus wrote:
> Add power management for sleep as well as runtime pm.
>
> Signed-off-by: Adriana Reus <adriana.r...@intel.com>
Mostly fine, but a comment on a possible future tidy up inline.
Applied to the togreg branch of iio.git - initially pushed out as
testing for the autobuilders to play with it.
> ---
> drivers/iio/light/us5182d.c | 95
> +++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 88 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c
> index 3d959f3..60cab4a 100644
> --- a/drivers/iio/light/us5182d.c
> +++ b/drivers/iio/light/us5182d.c
> @@ -23,6 +23,8 @@
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> #include <linux/mutex.h>
> +#include <linux/pm.h>
> +#include <linux/pm_runtime.h>
>
> #define US5182D_REG_CFG0 0x00
> #define US5182D_CFG0_ONESHOT_EN BIT(6)
> @@ -81,6 +83,7 @@
> #define US5182D_READ_BYTE 1
> #define US5182D_READ_WORD 2
> #define US5182D_OPSTORE_SLEEP_TIME 20 /* ms */
> +#define US5182D_SLEEP_MS 3000 /* ms */
>
> /* Available ranges: [12354, 7065, 3998, 2202, 1285, 498, 256, 138] lux */
> static const int us5182d_scales[] = {188500, 107800, 61000, 33600, 19600,
> 7600,
> @@ -298,6 +301,26 @@ static int us5182d_shutdown_en (struct us5182d_data
> *data, u8 state)
> return ret;
> }
>
> +
> +static int us5182d_set_power_state(struct us5182d_data *data, bool on)
> +{
> + int ret;
> +
> + if (data->power_mode == US5182D_ONESHOT)
> + return 0;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(&data->client->dev);
> + if (ret < 0)
> + pm_runtime_put_noidle(&data->client->dev);
> + } else {
> + pm_runtime_mark_last_busy(&data->client->dev);
> + ret = pm_runtime_put_autosuspend(&data->client->dev);
> + }
> +
> + return ret;
> +}
> +
> static int us5182d_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int *val,
> int *val2, long mask)
> @@ -315,15 +338,20 @@ static int us5182d_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> goto out_err;
> }
> - ret = us5182d_als_enable(data);
> + ret = us5182d_set_power_state(data, true);
> if (ret < 0)
> goto out_err;
> -
> + ret = us5182d_als_enable(data);
> + if (ret < 0)
> + goto out_poweroff;
> ret = us5182d_get_als(data);
> if (ret < 0)
> + goto out_poweroff;
> + *val = ret;
> + ret = us5182d_set_power_state(data, false);
> + if (ret < 0)
> goto out_err;
> mutex_unlock(&data->lock);
> - *val = ret;
> return IIO_VAL_INT;
> case IIO_PROXIMITY:
I'd argue the complexity of this has reached the point where ideally you'd
break it out to a function. The jumps out of the switch statement are
particularly nasty from a readability point of view.
Perhaps a job for a followup patch?
> mutex_lock(&data->lock);
> @@ -332,17 +360,22 @@ static int us5182d_read_raw(struct iio_dev *indio_dev,
> if (ret < 0)
> goto out_err;
> }
> - ret = us5182d_px_enable(data);
> + ret = us5182d_set_power_state(data, true);
> if (ret < 0)
> goto out_err;
> -
> + ret = us5182d_px_enable(data);
> + if (ret < 0)
> + goto out_poweroff;
> ret = i2c_smbus_read_word_data(data->client,
> US5182D_REG_PDL);
> if (ret < 0)
> + goto out_poweroff;
> + *val = ret;
> + ret = us5182d_set_power_state(data, false);
> + if (ret < 0)
> goto out_err;
> mutex_unlock(&data->lock);
> - *val = ret;
> - return IIO_VAL_INT;
> + return IIO_VAL_INT;
This is a little bit of noise that should have been dealt with separately...
> default:
> return -EINVAL;
> }
> @@ -361,6 +394,9 @@ static int us5182d_read_raw(struct iio_dev *indio_dev,
> }
>
> return -EINVAL;
> +
> +out_poweroff:
> + us5182d_set_power_state(data, false);
> out_err:
> mutex_unlock(&data->lock);
> return ret;
> @@ -577,6 +613,17 @@ static int us5182d_probe(struct i2c_client *client,
> if (ret < 0)
> goto out_err;
>
> + if (data->default_continuous) {
> + pm_runtime_set_active(&client->dev);
> + if (ret < 0)
> + goto out_err;
> + }
> +
> + pm_runtime_enable(&client->dev);
> + pm_runtime_set_autosuspend_delay(&client->dev,
> + US5182D_SLEEP_MS);
> + pm_runtime_use_autosuspend(&client->dev);
> +
> ret = iio_device_register(indio_dev);
> if (ret < 0)
> goto out_err;
> @@ -595,9 +642,42 @@ static int us5182d_remove(struct i2c_client *client)
>
> iio_device_unregister(i2c_get_clientdata(client));
>
> + pm_runtime_disable(&client->dev);
> + pm_runtime_set_suspended(&client->dev);
> +
> return us5182d_shutdown_en(data, US5182D_CFG0_SHUTDOWN_EN);
> }
>
> +#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM)
> +static int us5182d_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct us5182d_data *data = iio_priv(indio_dev);
> +
> + if (data->power_mode == US5182D_CONTINUOUS)
> + return us5182d_shutdown_en(data, US5182D_CFG0_SHUTDOWN_EN);
> +
> + return 0;
> +}
> +
> +static int us5182d_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct us5182d_data *data = iio_priv(indio_dev);
> +
> + if (data->power_mode == US5182D_CONTINUOUS)
> + return us5182d_shutdown_en(data,
> + ~US5182D_CFG0_SHUTDOWN_EN & 0xff);
> +
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops us5182d_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(us5182d_suspend, us5182d_resume)
> + SET_RUNTIME_PM_OPS(us5182d_suspend, us5182d_resume, NULL)
> +};
> +
> static const struct acpi_device_id us5182d_acpi_match[] = {
> { "USD5182", 0},
> {}
> @@ -615,6 +695,7 @@ MODULE_DEVICE_TABLE(i2c, us5182d_id);
> static struct i2c_driver us5182d_driver = {
> .driver = {
> .name = US5182D_DRV_NAME,
> + .pm = &us5182d_pm_ops,
> .acpi_match_table = ACPI_PTR(us5182d_acpi_match),
> },
> .probe = us5182d_probe,
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
