On 07/12/15 09:12, Jean-Francois Moine wrote:
> On Fri, 4 Dec 2015 22:24:42 +0100
> Jens Kuske <jensku...@gmail.com> wrote:
>
>> The Allwinner H3 is a home entertainment system oriented SoC with
>> four Cortex-A7 cores and a Mali-400MP2 GPU.
>>
>> Signed-off-by: Jens Kuske <jensku...@gmail.com>
>> ---
>> arch/arm/boot/dts/sun8i-h3.dtsi | 497
>> ++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 497 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun8i-h3.dtsi
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi
>> b/arch/arm/boot/dts/sun8i-h3.dtsi
>> new file mode 100644
>> index 0000000..1524130e
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
>> @@ -0,0 +1,497 @@
> [snip]
>> + bus_gates: clk@01c20060 {
>> + #clock-cells = <1>;
>> + compatible = "allwinner,sun8i-h3-bus-gates-clk";
>> + reg = <0x01c20060 0x14>;
>> + clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
>> + clock-names = "ahb1", "ahb2", "apb1", "apb2";
>> + clock-indices = <5>, <6>, <8>,
>> + <9>, <10>, <13>,
>> + <14>, <17>, <18>,
>> + <19>, <20>,
>> + <21>, <23>,
>> + <24>, <25>,
>> + <26>, <27>,
>> + <28>, <29>,
>> + <30>, <31>, <32>,
>> + <35>, <36>, <37>,
>> + <40>, <41>, <43>,
>> + <44>, <52>, <53>,
>> + <54>, <64>,
>> + <65>, <69>, <72>,
>> + <76>, <77>, <78>,
>> + <96>, <97>, <98>,
>> + <112>, <113>,
>> + <114>, <115>,
>> + <116>, <128>, <135>;
>> + clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
>> + "bus_mmc1", "bus_mmc2", "bus_nand",
>> + "bus_sdram", "bus_gmac", "bus_ts",
>> + "bus_hstimer", "bus_spi0",
>> + "bus_spi1", "bus_otg",
>> + "bus_otg_ehci0", "bus_ehci1",
>> + "bus_ehci2", "bus_ehci3",
>> + "bus_otg_ohci0", "bus_ohci1",
>> + "bus_ohci2", "bus_ohci3", "bus_ve",
>> + "bus_lcd0", "bus_lcd1",
>> "bus_deint",
>
> The tcon1 clock is used by both lcd0 and lcd1, while the tcon0 clock is used
> for TV output from lcd1, so, this should be:
>
> "bus_tcon0", "bus_tcon1", "bus_deint",
>
> (the tcon1 clock is used by both lcd0 and lcd1, while
> the tcon0 clock is used for TV output from lcd1)
Hi,
These are only the ahb bus gates, not the module clocks.
Naming them lcd might be a bit confusing, but it follows the naming we
used since sun4i. And the tcon modules are still called lcd0 and lcd1
module in the manual too.
Interestingly there is only a tcon0 module clock in the manual and no
tcon1, but that is not part of this patch.
Jens
>
>> + "bus_csi", "bus_tve", "bus_hdmi",
>> + "bus_de", "bus_gpu", "bus_msgbox",
>> + "bus_spinlock", "bus_codec",
>> + "bus_spdif", "bus_pio", "bus_ths",
>> + "bus_i2s0", "bus_i2s1", "bus_i2s2",
>> + "bus_i2c0", "bus_i2c1", "bus_i2c2",
>> + "bus_uart0", "bus_uart1",
>> + "bus_uart2", "bus_uart3",
>> + "bus_scr", "bus_ephy", "bus_dbg";
>> + };
> [snip]
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
