Add a "serial1" alias for the serial console (it's labeled "uart1"). Drop the "console=" parameter from the kernel command line, as it's no longer needed for DT-based platforms. Add the serial port config to chosen/stdout-path.
Signed-off-by: Geert Uytterhoeven <[email protected]> --- arch/arm/boot/dts/emev2-kzm9d.dts | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 8c24975e8f9d6638..191b565449509778 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -23,9 +23,13 @@ reg = <0x40000000 0x8000000>; }; + aliases { + serial1 = &uart1; + }; + chosen { - bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; - stdout-path = &uart1; + bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp"; + stdout-path = "serial1:115200n8"; }; gpio_keys { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
