Hi! On Tue, Dec 08, 2015 at 11:29:26AM +0100, Philipp Zabel wrote: > Am Dienstag, den 08.12.2015, 10:54 +0100 schrieb Steffen Trumtrar: > > Add the binding documentation for the Epson RX6110 RTC. > > > > Acked-by: Rob Herring <r...@kernel.org> > > Signed-off-by: Steffen Trumtrar <s.trumt...@pengutronix.de> > > Reviewed-by: Philipp Zabel <p.za...@pengutronix.de> > > although I'd like a small change to be made below: > > > --- > > Changes since v2: > > - removed the size field in i2c binding > > > > .../devicetree/bindings/rtc/epson,rx6110.txt | 39 > > ++++++++++++++++++++++ > > 1 file changed, 39 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > > > diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > new file mode 100644 > > index 000000000000..71353542a59d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt > > @@ -0,0 +1,39 @@ > > +Epson RX6110 Real Time Clock > > +============================ > > + > > +The Epson RX6110 can be used with SPI or I2C busses. The kind of > > +bus depends on the SPISEL pin and can not be configured via software. > > + > > +I2C mode > > +-------- > > + > > +Required properties: > > + - compatible: should be: "epson,rx6110" > > + - reg : offset of the register set of the device > > That should be the I2C address of the device, as in: > git grep "reg.*I2C address" Documentation/ >
Sounds reasonable. Changed. Thanks, Steffen Trumtrar -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
