Hi Brian,
I will be on vacation till 2016 January, 4th.
I will try to answer your questions as soon as possible.
Best regards,
Cyrille
Le 18/12/2015 02:55, Brian Norris a écrit :
> Hi Cyrille,
>
> On Mon, Dec 07, 2015 at 03:09:10PM +0100, Cyrille Pitchen wrote:
>> The quad (or dual) mode of a spi-nor memory may be enabled at boot time by
>> non-volatile bits in some setting register. Also such a mode may have
>> already been enabled at early stage by some boot loader.
>>
>> Hence, we should not guess the spi-nor memory is always configured for the
>> regular SPI 1-1-1 protocol.
>>
>> Micron and Macronix memories, once their Quad (or dual for Micron) mode
>> enabled, no longer process the regular JEDEC Read ID (0x9f) command but
>> instead reply to a new command: JEDEC Read ID Multiple I/O (0xaf).
>> Besides, in Quad mode both memory manufacturers expect ALL commands to
>> use the SPI 4-4-4 protocol. For Micron memories, enabling their Dual mode
>> implies to use the SPI 2-2-2 protocol for ALL commands.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitc...@atmel.com>
>> ---
>> drivers/mtd/spi-nor/spi-nor.c | 52
>> +++++++++++++++++++++++++++++++++++++++----
>> include/linux/mtd/spi-nor.h | 23 +++++++++++++++++--
>> 2 files changed, 69 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index 3b2460efc019..bf17736750c1 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -73,6 +73,11 @@ struct flash_info {
>>
>> #define JEDEC_MFR(info) ((info)->id[0])
>>
>> +struct read_id_config {
>> + enum read_mode mode;
>> + enum spi_protocol proto;
>> +};
>> +
>> static const struct flash_info *spi_nor_match_id(const char *name);
>>
>> /*
>> @@ -867,11 +872,16 @@ static const struct flash_info spi_nor_ids[] = {
>> { },
>> };
>>
>> -static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
>> +static const struct flash_info *spi_nor_read_id(struct spi_nor *nor,
>> + enum read_mode mode)
>
> It's unclear what you're trying to do with the 'read_mode' enum now.
> (Admittedly it may not be clear in the current code either, given the
> confusion we already have over Micron support.)
>
> Would you care to document it better?
>
>> {
>> - int tmp;
>> + int i, tmp;
>> u8 id[SPI_NOR_MAX_ID_LEN];
>> const struct flash_info *info;
>> + static const struct read_id_config configs[] = {
>> + {SPI_NOR_QUAD, SPI_PROTO_4_4_4},
>> + {SPI_NOR_DUAL, SPI_PROTO_2_2_2}
>> + };
>>
>> tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
>> if (tmp < 0) {
>> @@ -879,6 +889,34 @@ static const struct flash_info *spi_nor_read_id(struct
>> spi_nor *nor)
>> return ERR_PTR(tmp);
>> }
>>
>> + /* Special case for Micron/Macronix qspi nor. */
>> + if ((id[0] == 0xff && id[1] == 0xff && id[2] == 0xff) ||
>> + (id[0] == 0x00 && id[1] == 0x00 && id[2] == 0x00))
>> + for (i = 0; i < ARRAY_SIZE(configs); ++i) {
>> + if (configs[i].mode != mode)
>> + continue;
>> +
>> + /* Set this protocol for all commands. */
>> + nor->reg_proto = configs[i].proto;
>> + nor->read_proto = configs[i].proto;
>> + nor->write_proto = configs[i].proto;
>> + nor->erase_proto = configs[i].proto;
>
> Are these all fully independent? Do we really need 4 fields for this?
>
>> +
>> + /*
>> + * Multiple I/O Read ID only returns the Manufacturer ID
>> + * (1 byte) and the Device ID (2 bytes). So we reset the
>> + * remaining bytes.
>> + */
>> + memset(id, 0, sizeof(id));
>> + tmp = nor->read_reg(nor, SPINOR_OP_MIO_RDID, id, 3);
>> + if (tmp < 0) {
>> + dev_dbg(nor->dev,
>> + "error %d reading JEDEC ID Multi I/O\n",
>> + tmp);
>> + return ERR_PTR(tmp);
>> + }
>> + }
>> +
>> for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
>> info = &spi_nor_ids[tmp];
>> if (info->id_len) {
>> @@ -1178,11 +1216,17 @@ int spi_nor_scan(struct spi_nor *nor, const char
>> *name, enum read_mode mode)
>> if (ret)
>> return ret;
>>
>> + /* Reset SPI protocol for all commands */
>> + nor->erase_proto = SPI_PROTO_1_1_1;
>> + nor->read_proto = SPI_PROTO_1_1_1;
>> + nor->write_proto = SPI_PROTO_1_1_1;
>> + nor->reg_proto = SPI_PROTO_1_1_1;
>> +
>> if (name)
>> info = spi_nor_match_id(name);
>> /* Try to auto-detect if chip name wasn't specified or not found */
>> if (!info)
>> - info = spi_nor_read_id(nor);
>> + info = spi_nor_read_id(nor, mode);
>> if (IS_ERR_OR_NULL(info))
>> return -ENOENT;
>>
>> @@ -1193,7 +1237,7 @@ int spi_nor_scan(struct spi_nor *nor, const char
>> *name, enum read_mode mode)
>> if (name && info->id_len) {
>> const struct flash_info *jinfo;
>>
>> - jinfo = spi_nor_read_id(nor);
>> + jinfo = spi_nor_read_id(nor, mode);
>> if (IS_ERR(jinfo)) {
>> return PTR_ERR(jinfo);
>> } else if (jinfo != info) {
>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> index fac3f6f53981..c91986a99caf 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -75,8 +75,9 @@
>> #define SPINOR_OP_BRWR 0x17 /* Bank register write */
>>
>> /* Used for Micron flashes only. */
>> -#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
>> -#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
>> +#define SPINOR_OP_MIO_RDID 0xaf /* Multiple I/O Read JEDEC ID */
>> +#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
>> +#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
>>
>> /* Status Register bits. */
>> #define SR_WIP BIT(0) /* Write in progress */
>> @@ -105,6 +106,16 @@ enum read_mode {
>> SPI_NOR_QUAD,
>> };
>>
>> +enum spi_protocol {
>> + SPI_PROTO_1_1_1, /* SPI */
>> + SPI_PROTO_1_1_2, /* Dual Output */
>> + SPI_PROTO_1_1_4, /* Quad Output */
>> + SPI_PROTO_1_2_2, /* Dual IO */
>> + SPI_PROTO_1_4_4, /* Quad IO */
>> + SPI_PROTO_2_2_2, /* Dual Command */
>> + SPI_PROTO_4_4_4, /* Quad Command */
>
> Would it help at all to make this enum into something more like a
> bitfield? So in some cases, rather than a bit switch block, we can just
> extract the "number of lines" from the integer value? e.g.:
>
> #define SNOR_PROTO(command, addr, data) \
> (((command) << 0) | \
> ((addr) << 4) | \
> ((data) << 8)) // or some other kind of macro magic
>
> enum spi_nor_protocol {
> SNOR_PROTO_1_1_1 = SNOR_PROTO(1, 1, 1),
> SNOR_PROTO_1_1_2 = SNOR_PROTO(1, 1, 2),
> ...
> };
>
> static inline int spi_nor_io_lines_command(enum spi_nor_protocol proto)
> {
> return proto & 0xf;
> }
>
> (Similar for addr and data phases. Also, my naming might suck. Feel free
> to improve!)
>
> I don't think we should stomp on the SPI namespace with the
> "SPI_PROTO_*" definitions. That's why I chose SNOR_PROTO_ and spi_nor_
> prefixes.
>
> Brian
>
>> +};
>> +
>> #define SPI_NOR_MAX_CMD_SIZE 8
>> enum spi_nor_ops {
>> SPI_NOR_OPS_READ = 0,
>> @@ -132,6 +143,10 @@ enum spi_nor_option_flags {
>> * @flash_read: the mode of the read
>> * @sst_write_second: used by the SST write operation
>> * @flags: flag options for the current SPI-NOR (SNOR_F_*)
>> + * @erase_proto: the SPI protocol used by erase operations
>> + * @read_proto: the SPI protocol used by read operations
>> + * @write_proto: the SPI protocol used by write operations
>> + * @reg_proto the SPI protocol used by read_reg/write_reg
>> operations
>> * @cmd_buf: used by the write_reg
>> * @prepare: [OPTIONAL] do some preparations for the
>> * read/write/erase/lock/unlock operations
>> @@ -160,6 +175,10 @@ struct spi_nor {
>> u8 read_opcode;
>> u8 read_dummy;
>> u8 program_opcode;
>> + enum spi_protocol erase_proto;
>> + enum spi_protocol read_proto;
>> + enum spi_protocol write_proto;
>> + enum spi_protocol reg_proto;
>> enum read_mode flash_read;
>> bool sst_write_second;
>> u32 flags;
>> --
>> 1.8.2.2
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
