On 12/21/2015 07:58 PM, Vladimir Zapolskiy wrote:
The change adds fixed voltage regulator for SD controller, ARM MMCI
controller driver uses it to control card power management.
Signed-off-by: Vladimir Zapolskiy <[email protected]>
---
arch/arm/boot/dts/phy3250.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 34e15fd..5465b9e 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -45,6 +45,15 @@
enable-active-high;
regulator-boot-on;
};
+
+ sd_reg: fixed-regulator@2 {
Please just "regulator@2", to comply with the ePAPR standard.
thanks for review, just for my information, do I understand correctly
that you reference to "Generic Names Recommendation" ?
Sure, AKA 2.2.2. :-)
I have no objection to generalize device tree node name as you
suggested, will do it.
TIA.
With best wishes,
Vladimir
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
