Hi Rob, Could you please take this patch into account?
Thanks, Zhiqiang > -----Original Message----- > From: Zhiqiang Hou [mailto:zhiqiang....@freescale.com] > Sent: 2015年11月5日 11:16 > To: linuxppc-...@lists.ozlabs.org; Scott Wood; ga...@kernel.crashing.org; > b...@kernel.crashing.org; pau...@samba.org; m...@ellerman.id.au; > devicetree@vger.kernel.org; robh...@kernel.org; pawel.m...@arm.com; > mark.rutl...@arm.com; ijc+devicet...@hellion.org.uk; Harninder Rai > Cc: Minghuan Lian; Mingkai Hu; Zhiqiang Hou > Subject: [PATCH V4 1/2] powerpc/fsl: Add PCI node in device tree of > bsc9132qds > > From: Harninder Rai <harninder....@freescale.com> > > Signed-off-by: Harninder Rai <harninder....@freescale.com> > Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com> > Signed-off-by: Hou Zhiqiang <b48...@freescale.com> > --- > V4: V3: > - Remove gerrit stuff. > V2: > - Remove property clock-frequency. > > arch/powerpc/boot/dts/bsc9132qds.dts | 15 ++++++++++++++ > arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi | 28 > +++++++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > | 1 + > 3 files changed, 44 insertions(+) > > diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts > b/arch/powerpc/boot/dts/bsc9132qds.dts > index 6cab106..940d719 100644 > --- a/arch/powerpc/boot/dts/bsc9132qds.dts > +++ b/arch/powerpc/boot/dts/bsc9132qds.dts > @@ -29,6 +29,21 @@ > soc: soc@ff700000 { > ranges = <0x0 0x0 0xff700000 0x100000>; > }; > + > + pci0: pcie@ff70a000 { > + reg = <0 0xff70a000 0 0x1000>; > + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 > 0x20000000 > + 0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>; > + pcie@0 { > + ranges = <0x2000000 0x0 0x90000000 > + 0x2000000 0x0 0x90000000 > + 0x0 0x20000000 > + > + 0x1000000 0x0 0x0 > + 0x1000000 0x0 0x0 > + 0x0 0x100000>; > + }; > + }; > }; > > /include/ "bsc9132qds.dtsi" > diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > index c723071..b5f0715 100644 > --- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > @@ -40,6 +40,34 @@ > interrupts = <16 2 0 0 20 2 0 0>; > }; > > +/* controller at 0xa000 */ > +&pci0 { > + compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2"; > + device_type = "pci"; > + #size-cells = <2>; > + #address-cells = <3>; > + bus-range = <0 255>; > + interrupts = <16 2 0 0>; > + > + pcie@0 { > + reg = <0 0 0 0 0>; > + #interrupt-cells = <1>; > + #size-cells = <2>; > + #address-cells = <3>; > + device_type = "pci"; > + interrupts = <16 2 0 0>; > + interrupt-map-mask = <0xf800 0 0 7>; > + > + interrupt-map = < > + /* IDSEL 0x0 */ > + 0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0 > + 0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0 > + 0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0 > + 0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0 > + >; > + }; > +}; > + > &soc { > #address-cells = <1>; > #size-cells = <1>; > diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > index 301a9db..90f7949 100644 > --- a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > @@ -45,6 +45,7 @@ > serial0 = &serial0; > ethernet0 = &enet0; > ethernet1 = &enet1; > + pci0 = &pci0; > }; > > cpus { > -- > 2.1.0.27.g96db324
