Due to H/W errata, the HOST_IRQ_STAT register misses the edge interrupt
when clearing the HOST_IRQ_STAT register and hardware reporting the
PORT_IRQ_STAT register at the same clock cycle. As such, the
algorithm below outlines the workaround.

1. Read HOST_IRQ_STAT register and save the state.
2. Clear the HOST_IRQ_STAT register.
3. Read back the HOST_IRQ_STAT register.
4. If HOST_IRQ_STAT register equals to zero, then
   traverse the rest of port's PORT_IRQ_STAT register
   to check if an interrupt is triggered at that point else
   go to step 6.
5. If PORT_IRQ_STAT register of rest ports is not equal to zero
   then update the state of HOST_IRQ_STAT saved in step 1.
6. Handle port interrupts.
7. Exit

Signed-off-by: Suman Tripathi <stripa...@apm.com>
---
 drivers/ata/ahci.h    |    2 ++
 drivers/ata/libahci.c |   45 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 47 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 45586c1..736f4a5 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -242,6 +242,8 @@ enum {
        AHCI_HFLAG_NO_FBS               = (1 << 18), /* no FBS */
        AHCI_HFLAG_EDGE_IRQ             = (1 << 19), /* HOST_IRQ_STAT behaves as
                                                        Edge Triggered */
+       AHCI_HFLAG_EDGE_IRQ_BROKEN      = (1 << 20), /* HOST_IRQ_STAT miss edge
+                                                       from PORT_IRQ_STAT */

        /* ap->flags bits */

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 096064c..02b85c2 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1832,10 +1832,55 @@ static irqreturn_t ahci_multi_irqs_intr(int irq, void 
*dev_instance)
        return IRQ_WAKE_THREAD;
 }

+static void ahci_handle_broken_edge_irq(struct ata_host *host,
+                                       u32 *irq_masked)
+{
+       struct ahci_host_priv *hpriv = host->private_data;
+       void __iomem *mmio = hpriv->mmio;
+       unsigned int i, temp_irq_masked;
+       struct ata_port *next_ap;
+       void __iomem *port_mmio;
+       int j;
+
+       if (!readl(mmio + HOST_IRQ_STAT)) {
+               temp_irq_masked = *irq_masked;
+
+               for (i = 0; i < __sw_hweight32(hpriv->port_map);
+                    i++) {
+                       if (*irq_masked & (1 << i)) {
+                               for (j = 0;
+                                    j < __sw_hweight32(hpriv->port_map);
+                                    j++) {
+                                       if (i == j)
+                                               continue;
+
+                                       next_ap = host->ports[j];
+                                       port_mmio = ahci_port_base(next_ap);
+                                       if (readl(port_mmio + PORT_IRQ_STAT))
+                                               temp_irq_masked |= (1 << j);
+                               }
+                       }
+               }
+               *irq_masked = temp_irq_masked;
+       }
+
+}
+
 static u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked)
 {
+       struct ahci_host_priv *hpriv = host->private_data;
        unsigned int i, handled = 0;

+       /*
+        * For hardware with broken edge trigger latch
+        * the HOST_IRQ_STAT register misses the edge interrupt
+        * when clearing of HOST_IRQ_STAT register and hardware
+        * reporting the PORT_IRQ_STAT register at the
+        * same clock cycle.
+        */
+       if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ_BROKEN)
+               ahci_handle_broken_edge_irq(host, &irq_masked);
+
        for (i = 0; i < host->n_ports; i++) {
                struct ata_port *ap;

--
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to