On Wed, Jan 06, 2016 at 04:19:53PM +0530, Kishon Vijay Abraham I wrote:
> Perform syscon configurations to get x2 mode to working in DRA74x and
> DRA72x. Also add a new compatible string to dfferentiate
> DRA72x and DRA74x, since b1c0 mask is different for both these platforms.
> 
> Signed-off-by: Kishon Vijay Abraham I <kis...@ti.com>
> ---
>  Documentation/devicetree/bindings/pci/ti-pci.txt |    8 ++-
>  drivers/pci/host/pci-dra7xx.c                    |   81 
> +++++++++++++++++++++-
>  2 files changed, 86 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt 
> b/Documentation/devicetree/bindings/pci/ti-pci.txt
> index 60e2516..0b10e84 100644
> --- a/Documentation/devicetree/bindings/pci/ti-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
> @@ -1,7 +1,9 @@
>  TI PCI Controllers
>  
>  PCIe Designware Controller
> - - compatible: Should be "ti,dra7-pcie""
> + - compatible: "ti,dra7-pcie" is deprecated
> +            Should be "ti,dra746-pcie" for DRA74x
> +            Should be "ti,dra726-pcie" for DRA72x
>   - reg : Two register ranges as listed in the reg-names property
>   - reg-names : The first entry must be "ti-conf" for the TI specific 
> registers
>              The second entry must be "rc-dbics" for the designware pcie
> @@ -14,6 +16,10 @@ PCIe Designware Controller
>              where <X> is the instance number of the pcie from the HW spec.
>   - interrupts : Two interrupt entries must be specified. The first one is for
>               main interrupt line and the second for MSI interrupt line.
> + - syscon-lane-conf : phandle/offset pair. Phandle to the system control 
> module and the
> +   register offset to specify 1 lane or 2 lane.
> + - syscon-lane-sel : phandle/offset pair. Phandle to the system control 
> module and the
> +   register offset to specify lane selection.

These should have a ti prefix.

>   - #address-cells,
>     #size-cells,
>     #interrupt-cells,
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to