On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote:
> diff --git a/arch/mips/boot/dts/ingenic/ci20.dts
> b/arch/mips/boot/dts/ingenic/ci20.dts
> index 9fcb9e7..782258c 100644
> --- a/arch/mips/boot/dts/ingenic/ci20.dts
> +++ b/arch/mips/boot/dts/ingenic/ci20.dts
As I noted on patch 1, you need to send this to linux-mips + Ralf.
> @@ -42,3 +42,66 @@
> &uart4 {
> status = "okay";
> };
> +
> +&nemc {
> + status = "okay";
> +
> + nandc: nand-controller@1 {
> + compatible = "ingenic,jz4780-nand";
> + reg = <1 0 0x1000000>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ingenic,bch-controller = <&bch>;
> +
> + ingenic,nemc-tAS = <10>;
> + ingenic,nemc-tAH = <5>;
> + ingenic,nemc-tBP = <10>;
> + ingenic,nemc-tAW = <15>;
> + ingenic,nemc-tSTRV = <100>;
> +
> + nand@1 {
> + reg = <1>;
> +
> + nand-ecc-step-size = <1024>;
> + nand-ecc-strength = <24>;
> + nand-ecc-mode = "hw";
> + nand-on-flash-bbt;
> +
> + partitions {
> + #address-cells = <2>;
> + #size-cells = <2>;
This binding was updated, so you need:
compatible = "fixed-partitions";
Brian
> +
> + partition@0 {
> + label = "u-boot-spl";
> + reg = <0x0 0x0 0x0 0x800000>;
> + };
> +
> + partition@0x800000 {
> + label = "u-boot";
> + reg = <0x0 0x800000 0x0 0x200000>;
> + };
> +
> + partition@0xa00000 {
> + label = "u-boot-env";
> + reg = <0x0 0xa00000 0x0 0x200000>;
> + };
> +
> + partition@0xc00000 {
> + label = "boot";
> + reg = <0x0 0xc00000 0x0 0x4000000>;
> + };
> +
> + partition@0x8c00000 {
> + label = "system";
> + reg = <0x0 0x4c00000 0x1 0xfb400000>;
> + };
> + };
> + };
> + };
> +};
> +
> +&bch {
> + status = "okay";
> +};
Brian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
