Hi All,
I have had Success with the Webgear/Raylink 2mb wireless NICs under
e-smith with basicly no work to get it going. On my test box P133 i
installed a pcmcia adapter (ISA <..> PCMCIA) and booted the box with the
raylink wireless card in it.
I made /etc/sysconfig/network-scripts/ifcfg-eth2
DEVICE=eth2
USERCTL=no
ONBOOT=yes
BOOTPROTO=none
IPADDR=192.168.2.1
NETMASK=255.255.255.0
NETWORK=192.168.2.0
BROADCAST=192.168.2.255
changed /etc/pcmcia/config.opts
module "ray_cs" opts "essid=wisp hop_dwell=128 beacon_period=256
translate=0"
and service pcmcia start... beep, beeps and e-smith goes wireless.
I know that i have not made up templates for
/etc/sysconfig/network-scripts/ifcfg-eth2 and this setup will be removed
after a reconfig or upgrade. Just a test
Getting to my point...
If the raylink and webgear wireless NICs work under e-smith so why not add
the two NICs to the supported hardware list ?
--
Michael Maxwell
E-Mail: [EMAIL PROTECTED]
Web Site: www.airnet.wox.org
AirNet Melbourne, Australia
