But, don't assume all systems will fail. I used a couple of E60s for
installation and development for over 9 months and never once had the
problem Steve did.
I found the E60 to be extremely reliable and a good performer.
Scott
> -----Original Message-----
> From: Timothy C Litwiller [mailto:[EMAIL PROTECTED]]
> Sent: Monday, June 25, 2001 4:00 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [e-smith-devinfo] HP e50 netserver
>
>
> thanks very much Steve, I will file this away till the install.
>
>
>
> Steve Bush wrote:
>
> > > It looks like I will be installing e-smith on a used HP
> e50 netserver.
> > > has anyone had experience with
> > > these? If you have, were there any hardware/driver
> problems that I need
> > > to be aware of?
> >
> > I installed it on a HP e60 and had a problem booting.
> > I don't know if the e50 will exhibit the same problem,
> > but her you go just in case:
> >
> > After e-Smith was installed and rebooted, it would hang
> after enabling
> > swap space. I finally found a bug report on Redhat's site:
> > http://www.redhat.com/support/docs/gotchas/7.0/gotchas-7-7.html
> > (7.6 After installation, system hangs at "Enabling swap space")
> > http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=18793
> >
> > It detailed how to boot up without running the rc.sysinit script.
> > I then edited that file, which is /etc/rc.d/rc.sysinit and
> commented out
> > the lines relating to agpgart and all booted fine.
> >
> > --
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> > Archives by mail and
> http://www.mail-archive.com/devinfo%40lists.e-smith.org
>
>
> --
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> Archives by mail and
> http://www.mail-archive.com/devinfo%40lists.e-smith.org
>
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org