Ditto.
I have installed 5 servers with various escalade cards and e-smith and no
hassles.
Then don't forget to add 3dmd monitor tool. Follow Eric's how to - but
select a port below 1024 as the port to use. As those are all blocked by
e-smith - don't choose one that is used by another service! I used 979 as
it is next to 980 the admin http port. :)
Richard.
----- Original Message -----
From: "David Brown" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Wednesday, August 15, 2001 8:06 AM
Subject: RE: [e-smith-devinfo] 3ware naked boot: BUG
> This seems odd to me - I just setup an e-smith server with a 3ware
Escalade
> 6410 with no problems at all. I had no ide drives other than those
> connected to the raid controller, and they were blank. Booted off the
CDROM
> and did a standard install from scratch. Not a single problem. My
> lilo.conf shows boot=/dev/sda, without any modification on my part. I for
> one think the 3ware card to be the best on I've worked with, especially
> since it's supported on e-smith right out of the box.
>
> David M. Brown
> Frick, Frick & Jetté Architects
> [EMAIL PROTECTED]
>
> -----Original Message-----
> From: Tom Lyon [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, August 14, 2001 2:47 PM
> To: [EMAIL PROTECTED]
> Subject: [e-smith-devinfo] 3ware naked boot: BUG
>
>
> Hi, I've just been through the process of booting e-smith on
> a small DELL server with a 3ware 6200 controller with mirrored
> drives. It has been painful.
>
> The server was totally clean, no OS, no IDE drives. e-smith
> seems to really want to see /dev/hda since there were several
> timeout/error messages. But the biggest problem/BUG was that
> the lilo.conf file and the MBR were created to point at
> /dev/hda instead of /dev/sda. Once I fixed that (after learning
> some Linux), everything seems fine.
>
> p.s. booted from CDROM
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
>
> --
> Please report bugs to [EMAIL PROTECTED]
> Please mail [EMAIL PROTECTED] (only) to discuss security issues
> Support for registered customers and partners to [EMAIL PROTECTED]
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> Archives by mail and
http://www.mail-archive.com/devinfo%40lists.e-smith.org
>
>
>
> --
> Please report bugs to [EMAIL PROTECTED]
> Please mail [EMAIL PROTECTED] (only) to discuss security issues
> Support for registered customers and partners to [EMAIL PROTECTED]
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> Archives by mail and
http://www.mail-archive.com/devinfo%40lists.e-smith.org
>
>
--
Please report bugs to [EMAIL PROTECTED]
Please mail [EMAIL PROTECTED] (only) to discuss security issues
Support for registered customers and partners to [EMAIL PROTECTED]
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
