On Tue, 26 Aug 2003, Charlie Brady wrote:On Tue, 26 Aug 2003, stephen noble wrote:what would need to change to get it to work ?
http://www.linuxsa.org.au/mailing-list/2003-08/247.html
suggests that "acm" is the appropriate xxxx. There is also a suggestion of what you need in the dial init string, to enable DOV and 128k - "!T0=0!T4=1".
after the following changes i have the usb modem working telstra NT1 plus II on sme6b3 the performance was terrible, don't know why modem lights reported single and dual channels modes were working wget only gave 3K/s on ttyS0 i get 7 or 11
add ln -s /dev/input/ttyACM0 /dev/ttyACM0
plug in the usb cable and i'm rewarded with
Sep 7 08:39:08 sme6 kernel: hub.c: new USB device 00:07.2-1, assigned address 2
Sep 7 08:39:08 sme6 kernel: usb.c: USB device 2 (vend/prod 0xaca/0x1060) is not claimed by any active driver.
Sep 7 08:39:11 sme6 /etc/hotplug/usb.agent: Setup acm for USB product aca/1060/10
Sep 7 08:39:11 sme6 kernel: usb.c: registered new driver acm
Sep 7 08:39:11 sme6 kernel: ttyACM0: USB ACM device
Sep 7 08:39:12 sme6 kernel: acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
Sep 7 08:39:12 sme6 kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c3edb5c0, burb c3edb840
Sep 7 08:39:12 sme6 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
Sep 7 08:39:12 sme6 kernel: usb-uhci.c: ENXIO 80000280, flags 0, urb c3edb1c0, burb c3edb5c0
Sep 7 08:39:12 sme6 kernel: usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
pico -w /etc/sysconfig/network-scripts/chat-ppp0
comment out this line #'OK' 'ATL0M0'
i currently use 'OK' 'ATZ!Z=9!T0=0!T2=1' T4=1 sometimes forces 128 and won't release the second line maybe just a fluke so i'm still playaing with the settings
pico -w /etc/diald.conf
device /dev/ttyACM0
speed 115200 ? pick a higher number ?
stephen noble dungog.net/sme
-- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
