Hi Liang, There is already a wishlist's gitlab ticket for this
https://gitlab.com/kicad/code/kicad/-/issues/7232 You might give a thumbs up there ;-) And BTW. 50 copper layer, really? I am curious what are you designing? As you can see here https://docs.kicad.org/7.0/en/pcbnew/pcbnew.html#capabilities > KiCad is capable of creating printed circuit boards with up to 32 copper layers, > 14 technical layers (silkscreen, solder mask, component adhesive, solder paste, etc), and 13 general-purpose drawing layers. So when you don't need 50 copper layer, there might be already enough layers ;-) Best regards, Stefan [email protected] schrieb am Mittwoch, 22. Februar 2023 um 08:18:46 UTC+1: > Hi Dear KiCAD Group, > > We want to use KiCAD for our products, but we found one limitation which > block us. > The max copper layer is 32 now. but our products need more than 50 layers. > I searched the group, there are not related information, so I start this > conversation. > > I have two questions? > 1. Why there is only 32 layers in KiCAD? > 2. If we want to adapt the code of KiCAD to support more higher layer, > Is it possible? > Which point we should take care? > > Sincerely > Liang > -- You received this message because you are subscribed to the Google Groups "KiCad Developers" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/kicad.org/d/msgid/devlist/d1cc8ae3-a5c7-4cda-bb9d-3990977f8543n%40kicad.org.
