Hi All!
I guess this is intentional, but just in case. Testing 7.99 I found a
change in the gerbers for the Adhesive layer.
If this is on purpose: Why? So I can document it (note: I used the
attributes to detect if the adhesive was there for certain components)
$ diff -u v6.gbr v8.gbr
--- v6.gbr 2023-04-05 13:26:09.145850356 -0300
+++ v8.gbr 2023-04-05 13:26:41.634019762 -0300
@@ -1,12 +1,12 @@
-%TF.GenerationSoftware,KiCad,Pcbnew,6.0.11+dfsg-1~bpo11+1*%
-%TF.CreationDate,2023-04-05T13:25:09-03:00*%
+%TF.GenerationSoftware,KiCad,Pcbnew,7.99.0-unknown-fd07f50c44~170~ubuntu22.10.1*%
+%TF.CreationDate,2023-04-05T16:18:25+00:00*%
%TF.ProjectId,kibom-variant_3,6b69626f-6d2d-4766-9172-69616e745f33,rev?*%
%TF.SameCoordinates,Original*%
%TF.FileFunction,Glue,Top*%
%TF.FilePolarity,Positive*%
%FSLAX46Y46*%
G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
-G04 Created by KiCad (PCBNEW 6.0.11+dfsg-1~bpo11+1) date 2023-04-05
13:25:09*
+G04 Created by KiCad (PCBNEW
7.99.0-unknown-fd07f50c44~170~ubuntu22.10.1) date 2023-04-05 16:18:25*
%MOMM*%
%LPD*%
G01*
@@ -14,23 +14,19 @@
%ADD10C,0.100000*%
G04 APERTURE END LIST*
D10*
-%TO.C,R2*%
X141970000Y-90580000D02*
G75*
G03*
X141970000Y-90580000I-400000J0D01*
G01*
-%TO.C,R1*%
X141970000Y-87630000D02*
G75*
G03*
X141970000Y-87630000I-400000J0D01*
G01*
-%TO.C,R3*%
X148955000Y-89154000D02*
G75*
G03*
X148955000Y-89154000I-400000J0D01*
G01*
-%TD*%
M02*
--
You received this message because you are subscribed to the Google Groups "KiCad
Developers" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/a/kicad.org/d/msgid/devlist/a76306d0-7731-4246-0a5e-5fe132f62cb2%40inti.gob.ar.
