Weed wrote:
Don пишет:
Weed wrote:
Don пишет:
Weed wrote:
Don пишет:
Weed wrote:
Denis Koroskin пишет:
80490eb: 8d 85 6c fe ff ff lea -0x194(%ebp),%eax
80490f1: 50 push %eax
80490f2: 8d 85 2c fb ff ff lea -0x4d4(%ebp),%eax
80490f8: e8 67 ff ff ff *call 8049064*
80490fd: e8 62 ff ff ff *call 8049064*
return c2.i;
8049102: 8b 85 cc fc ff ff mov -0x334(%ebp),%eax
...
(in 80490f8 and 80490fd simply two calls successively)
If structures and classes were same that excellent optimization in
any
case would turn out
If that's your use case, then your should seriosly reconsider using
struct instead of class for your objects.
Classes always give such overhead if them to use in such quality. For
example, classes basically cannot be used as any mathematical objects
using overload of arithmetics. But also not only arithmetics, it
it is
simple as a good example.
Alternatively, you can use +=
instead.
Here yes, but if I add classes of different types? Then not to escape
any more from creation of the temporary object in the heap.
Other than that, this is not a convincing argument.
Reading many of your posts I came to a conclusion that you are
shortsighted and too crazy about performance. What you care about
is a
premature optimization, which is a root of all the evil. You should
ensure that your programm is complete and correct, first and *then*
start doing profiling and optimizations.
The program is already ready. It entirely consists of the various
mathematics. Approximately %30 times of performance are spent for
similar superfluous work. On C++ the program will work on %30
faster (I
hope :)) and on D I am will turn out to do nothing with it.
Going back to the topic, dividing user types into two cathegories
(structs and classes) is considered modern and right.
I do not accept such argument:)
Some languages
lack structs support at all (e.g. Java), but structs are too useful
for
optimization and language interoperation to drop them in a systems
programming language. Some lack classes and try doing everything
with
structs (C). D takes the best of both worlds.
Probably I have not understood something, but I do not suggest to
refuse
structures in general. I suggest to allow to create classes on a
stack
as it is made in C++. That is actually to make structures and classes
same, than they and are, for example, in C++.
In the initial message I have shown that for perfomance important
that
the class could be transferred and on value. And it not artful
premature
optimisation - objects on value always so are transferred, all
programmers know it and use when do not wish to allocate a place in a
heap, that is usually always when the object will live in {}.
Besides, a class in a stack it is normal - keyword addition
"scope" for
classes too speaks about it.
Rigidly having divided classes and structures D deprives of the
programmer of some possibilities which give it C++-like languages. I
consider that such languages should give all possibilities which
allows
CPU but hiding concrete architecture, otherwise I would choose less
difficult in use language.
Use classes if you want polymorphism. Otherwise, use structs. It's a
clear distinction, which is not at all arbitrary -- there are
significant implications for the generated code.
And if polymorphism is necessary and such calculations are necessary as
I have above described? To emulate polymorphism with the mixins? Or
simply to reconcile to such obvious losses?
I about that that division into classes and structures in language D
automatically reduce perfomance of programs. Unlike languages where
this
division is not present (C++).
I agree with you that there's a problem, but I think you're wrong about
the solution. C++ suffers from severe problems with creation of
temporaries in expressions. The problem occurs whenever you have heap
allocations inside an object which does operator overloading.
Nothing can be done with it in any case.
If the class uses in itself dynamic allocation through "new" that this
memory will be allocated in a heap. But time in a class is used such way
of allocation that for this purpose there are reasons.
You certainly can do something about it. By rearranging the expression,
you can avoid the unnecessary creation of temporaries.
I consider that it wrong and I quote myself:
=========
Alternatively, you can use +=
instead.
Here yes, but if I add classes of different types? Then not to escape
any more from creation of the temporary object in the heap.
=========
Sure, in
the simple case you mentioned, using a struct works because the size of
the data is small.
No. Structure used only because it is the type transferred on value in D.
That's not what I meant. You can have an object which contains a pointer
to heap-allocated data (eg, it could contain a dynamic array). Turning
the object from a class into a struct does not remove the heap allocation.
And still the object can to access, for example, to a file system in the
constructor. :) But if the programmer has written object so that it was
fast (did not use call to a heap) that all will be ok.
But it general, it's not possible to avoid the heap
allocation, and so in C++ you'll still have a problem.
The creation of temporaries during expressions is something I'm
currently working on solving. The case you mentioned is addressed by a
proposal I made long ago:
http://d.puremagic.com/issues/show_bug.cgi?id=124
c2 = c1 + c1 + c1;
would be transformed into
t1 = c1 + c1;
t1.opAddAssign(c1);
c2 = t1;
which gets rid of the temporary heap allocation.
I don't think you could ever get rid of the heap allocation for c2 since
(a) c2 might be null, initially;
In this case opAdd returns the result object to which the name c2 will
be assigned.
and (b) c2 might be pointing to the
same place as c1.
There will be the same as (a).
My point is that you might hope to be able to avoid memory allocation
entirely, putting the new value of c2 in-place, but case (a) and (b)
make it impossible. There will always be ONE heap allocation.
If class are stored in a stack that there will be no.
If it is necessary to equate to the existing object (for example that it
did not change the position in memory) it is possible to overload that
the operator [] = and to make so: c2 [] = c1 + c1 + c1;
Nonetheless, I'd like to do better than this.
Consider:
C c1, c2, c3;
c3 = c1*5 + c2/6;
The optimal solution depends on whether in-place operations are possible
or not. Interestingly, X+=Y is more efficient than X=X+Y only if
in-place operations are possible; there's no point in defining it if
in-place is impossible.
There can be I something do not understand, but the decision should be
more the general than optimization of an overload of operators.
Eventually, the overload of operators is simply syntactic sugar. I used
them simply as an example.
OK, then you're getting into another issue...
It is possible to think up other example where there is no overload:
space_ship_1.calculatePathTo("Moon").getCheckpoint(3).getCoords;
In this example we create a temporary class "path", create temporary
class "checkpoint" and we take coords of checkpoint of this path. It is
not expedient to us to store all this path and checkpoint because it is
vary.
I fail to see how D's distinction between classes and structs has any
bearing on this. The optimisations you're talking about are only
possible in the presence of polymorphism, in cases where you can prove
that polymorphism is not being used! I suspect that if you're
encountering this issue in speed-critical code, there's a problem with
your design.
Quite right, if polymorphism I would not be necessary to me did not use
classes, it is obvious. All the rest that you have told it the common
words so experts in marketing speak. :)
I give concrete examples from a life where D is bad. You see a design
problem in the code resulted above?
If the overhead caused by using classes is unacceptable, then yes. I'd
want to see the definition of "checkpoint". If it's really polymorphic,
how can it be stored on the stack? This doesn't make sense to me.
By the way, one of serious problem: if necessary it is difficult enough
to alter a class in structure and vice versa. Insufficiently simply to
change the keyword. And it is serious, it is not necessary to me to tell
about planning.
Case 1: in-place operations are possible, += exists. All operators
include destination.
Convert to t1 = c2/6; c3 = c1*5; c3+=t1;
---
LocalHeap h;
t1 = h.new(C); // create on LocalHeap h
t1.operatorWithDestination("/")(c2, 6);
C t2 = new C; // create on heap
t2.operatorWithDestination!("*")(c1, 5);
c3 = t2.operatorAssign!("+")(t1); // in-place += operation on heap
h.releaseAll;
---
Case 2: in-place operations are impossible, += doesn't exist.
---
LocalHeap h;
t1 = c1.operatorTemporary!("*")(5, h); // create on local heap
t2 = c2.operatorTemporary!("/")(6, h); // create on local heap
c3 = t1.operator!("+")(t2); // create on heap
h.releaseAll;
---
It's far too complicated at present to be workable, but that's the basic
idea.
Whether tells word introduction "scope" and such attempts of
optimization about that that the design of objects in D is wrong? ]:)
No, I think the design of objects in D is sound. I think operator
overloading in both D and C++ is incomplete.
It simply sugar, it is not necessary to forget