It maybe as simple as line out of the digital sound card through a T connector to the line-in or mic in of the second card. You may need to provide a resistor pad or pot depending on how you feed the second card. I tried it and it worked OK for me, I did however see some feedback form the monitor card to the primary card, could have been some over drive. I also used the same input to both sound cards so I could run two different waterfall displays, again I had interaction between them but I think it was internal and not an external problem. Maybe some other sound-card experts will comment, I would also be interested in their comments
Ron W4LDE ----- Original Message ----- From: Kevin der Kinderen <[EMAIL PROTECTED]> Date: Wednesday, April 6, 2005 6:07 pm Subject: [digitalradio] Dual Soundcard Audio Routing > Soundcard 0 is set to default and used for music, computer sounds, > etc. > Soundcard 1 is used for digital modes only and is selected by MixW. > > > > Question: Is there any way monitor the radio's audio at soundcard > 1 with > soundcard 0 so I can get it to the speakers? XP seems to treat the > two cards > totally independently with no interaction between the two. Is > there some > sort of software mixer I can use or a hidden feature I can't find? > > > > 73 de KJ4QF > > Kevin > > > > > > > > Kevin der Kinderen > > http://kj4qf.net/ > > > > The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
