Pawel discussed using parallel decoders and picking the one with the best SNR...it should be fairly easy for programs that already support parallel decoding. If you can spot the bandwidth, though, that gives most of the info, and once the selection of parameters for Olivia settles down, it might even be enough. On Wed, 22 Jun 2005 3:42 pm, Danny Douglas wrote: > I guess I am confused about passing all these setting etc etc to make a > contact. If a digital mode is not capable of simply tuning across, and > making a contact without all the extra setting-up jazz, then maybe it > needs a lot of fixing up before being turned over to the rest of us. > My original digital tnc, along with its software, was capable to having > me tune across a signal, then it determined which digiatal mode it was > seeing, and simply set itself up to work with that mode. (MFJ 1278B). > Surely, any digital mode software can and should be set up to do that, > especially when it is a one-off mode?
The K3UK DIGITAL MODES SPOTTING CLUSTER AT telnet://208.15.25.196/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
