Thanks for the input. Is there a specific setting
for these or something that needs to be tested in the PSK mode?
Thanks again, Dave
KG4BIR
----- Original Message -----
Sent: Sunday, January 08, 2006 10:56
PM
Subject: Re: [digitalradio] PSK31
Sounds like you might have run into the volume
control problem.... there are 2 volume controls for your sound card, in and
out..... Windows calls them recording and playback. To access both , click on
"properties" while in the volume control mode under windows, and then you can
set both the input and output levels.
welcome to the group and hope to see u on the air
soon
73's
John
VE5MU
----- Original Message -----
Sent: Sunday, January 08, 2006 7:01
PM
Subject: [digitalradio] PSK31
Greetings, I just joined this group. I'm trying to get my
PSK31 working and seem to have hit some type of roadblock. I'm using a
BUXCOMM Rascal Black box for the interface into a Kenwood TS-570. The
software I'm using is Digipan. I seem to be able to receive just fine
but the problem is transmitting. The black box red light comes on and
the transceiver keys but nothing moves on the radios meter. Is there
something I don't have set right in my sound card or something? Any
help would be most appreciated.
73, Dave (digitally
frustrated) KG4BIR
No virus found in this incoming message. Checked by AVG Free
Edition. Version: 7.0.371 / Virus Database: 267.14.15/223 - Release Date:
1/6/06
Need a Digital mode QSO? Connect to telnet://208.15.25.196/
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion)
YAHOO! GROUPS LINKS
|