Gurus, OK, I'm trying to get up and running on PSK.
Running a Mk-V Field with Microham MicroKeyer, using Digipan. I'm using the IMD Meter by kk7uq to monitor IMD. Diawa CN-801 power meter used to read output into a dummy load. I have used the Easy Set to set the User function to PS31-U. This is the behavior I am getting: Using the User function (supposedly optimized for PSK): I get a max of about 80 watts out at idle with the IMD never getting below about -15 db even at the lowest power output - not good! Straight Packet setting - not User function: I get a max of 4Watts out at idle but IMD is never higher than -34DB - that's good. So how do I get up to 35 watts or so and still have decent IMD - this just doesn't seem right to me. So what am I missing? Thanks for any help. Dennis AI8P Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org Other areas of interest: The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
