under Ports, find the USB adapter, right click, then Properties, Set for:
Bits per Second: 9600
Data bits: 8
Parity: None
Stop bits: None
Flow Control: None
Advanced: make sure it supports "Use FIFO buffers" requires 16550
UART, then set for fast on both sliders.
HTH,
Jerry - K0HZI
--- In digitalradio@yahoogroups.com, "shakennotstirred123"
<[EMAIL PROTECTED]> wrote:
I have a 718, use XP, Digipan, and a Targus USB/Serial adapter. My
rig goes into transmit if I plug in the adapter and the serial port in
Digipan is not selected.
Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org
Other areas of interest:
The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/
DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion)
YAHOO! GROUPS LINKS
- Visit your group "digitalradio" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
