Got you logged. I'm located in Euless, Texas...just southwest of Dallas.
PhilW de KA1GMN
143500 0 -9 1.8 -670 3
143500 1 2/4 CQ WD4GBW FM17 1 0
143600 1 -13 10.0 -657 4 * WD4KPD N4WO EL88 1 0
143600 1 3/5 WD4KPD N4WO EL88 1 0
143700 0 -18 10.0 -670 3
143700 1 3/5 WD4KPD N4WO EL88 1 0
143800 0 -14 10.0 -659 3
143800 1 3/6 WD4KPD N4WO EL88 1 0
David Michael Gaytko // WD4KPD <[EMAIL PROTECTED]> wrote:
i know some of you have noticed some odd sounding
jt65a on the bands very slow and narrow by about 1/2.
at least it sounded like that, and no decoder in Multipsk
could decode it.
well today i fired up WSJT and sent some cq's. my signal
sounded just like that, and i had not changed anything
in the program. finally noticed that the sound card error
that is monitored in the bottom left corner of WSJT showed
a tx error of 3.0, when of course it should be 1.0. i went to
the dos settings and checked, they seemed unchanged. restarted
WSJT, and problem cleared.
so if you can monitor you tx audio, keep an eye on the sound card
errors in WSJT.
david/wd4kpd
PhilW, KA1GMN
