I couldn't get fldigi to run. I get "aborted" with no explanation.
However, to answer your question, $HOME/.<something> is: /root/.fldigi $HOME = /root/ Jim WA0LYK --- In digitalradio@yahoogroups.com, "k5rud" <[EMAIL PROTECTED]> wrote: > > I had a number of problems with the system. It booted fine. I got > both programs running. > > I have a Rigblaster Plug & Play which is a USB serial port. I could > not determine what serial port that would be to setup the C-IV for my > Icom. I needed that for PTT. I also tried to follow the directions > for setting up their rig control but (1) where is $HOME/.<something>? > I opened the file viewer, clicked home but saw nothing that looked > like that directory. > > I could see no input. This is a laptop and I only have mike input. I > could generate output from the sound card so I think the sound card > was found okay. > > I decided to pass on this for right now and switch back to Windows. > This is the first use of the Rigblaster since I got arrived on > Wednesday. It is working under Vista using DM780 and HRD. It is neat > using the C-IV to control the rig! > > The only hassle is that the mike input is to hot so overdrives the > sound card. Guess I need to put a pot to allow adjusting it. > > Since this is my first digital experience I do not know what signals > I am hearing to select the digital mode. I did listen to a PSK-31 > QSO. But while I can hear and see other signals I cannot get them to > decode. > > Rud K5RUD >