Jose, Thanks for the tip. The VE3NEA Voice Shaper works well with FDMDV and has EQ, compression and a noise gate similar to the Romac software.
I use VAC (virtual audio cable) to route the audio from Voice Shaper to FDMDV. I understand Jack ( http://jackaudio.org ) will do the same thing as VAC, but I haven't tried it. Thanks again Jose... Tony - K2MO ----- Original Message ----- From: "Jose A. Amador" <[EMAIL PROTECTED]> To: <digitalradio@yahoogroups.com> Sent: Friday, June 13, 2008 7:59 AM Subject: Re: [digitalradio] DV Equalizer > > Tony, > > I am using VE3NEA's Voice Shaper for SSB, with good results. I have not > used it for DV. I am using a cheap earphone / mic combo, also a good > performer. > > I do not know the Romac EQ, and I doubt I'll try it if it is time limited. > > 73, > > Jose, CO2JA > > --- > > Tony wrote: > >> All, >> >> Does anyone know of a good audio EQ program similar to the Romac 10 band EQ? >> Need one that can use different sound cards for mic / speaker input / >> outputs. An open source program would be ideal. >> >> The Romac 30 hour trial we're using to experiment with digital voice is >> about to run out. >> >> Thanks >> >> Tony - K2MO > >
