Hi guys just a quickie to say that Alex KR1ST is about to release version 1.7.1.3. Developed from the ground up for Vista, and of course compatability with XP etc this is a very good basic software and worthy of recognition....in my humble opinion :-).
This version of Airlink Express is a complete rewrite of the application in C#. Added: - TX/RX switching through CAT commands for all supported radios (this eliminates the need for a separate comport and interface for PTT) - RTS Handshake option for FT-2000/9000/950/450 - CAT support for FT-2000/FT-950/FT-450/FTdx9000 support - CAT support for Elecraft K2 and K3 - CAT support for Kenwood radios - TX/RX window clear button on the toolbar - option to show the tone frequency or actual RF frequency (if CAT turned on) on the waterfall and spectrum view - checkmark next to the callsign field that will indicate if you have worked a station before - partial log export - option to use left, right or both channels on the input Fixed: - small logging error when an empty entry gets deleted - audio issues on certain Compaq laptops that have no electronic volume control (no mixer elements) - exporting complex callsigns - when a comport gets removed from a computer dynamically (or in between sessions) the program will resort to a comport setting of "None" - same for comport settings in rig control - switching between letters and figures in FSK mode Changed: - change the default RST to something else than 599 - log window can now stay open continuously - the repeat interval so one can never enter a blank interval time - refined automatic callsign recognition - the position of the seperation bar between the RX and TX window and between the waterfall and spectrum view will now be saved between sessions See http://www.airlinkexpress.org Hope you enjoy. Cheers Dave G3VFP