Don't expect help from Tigertronics.
On 10/20/09, Gmail - Kevin, Natalia, Stacey & Rochelle <spar...@gmail.com> wrote: > HI All, > > The SignaLink would not work with any data software even MixW. > I tried DM780, MMSSTV, WinMor, MixW and a couple of others. > > I pulled all the cables out and re-inserted them. This is a USB device so > there is no RTS or DTS to worry about. > It was very plain and simple, plug and go (basically). > The thing is it ran from the day I received it which was about 5-6 weeks > ago. There have been no changes with the computer (to all programs), yes > there have been the odd update for the likes of DM-780 and WinMor, but > MMSSTV and MixW are the originals. So why a change to trigger the PTT from > the SignaLink? > > I then went through the manual and found that pin 4 gives double the > sensitivity to the PTT, which I then jumped and this did improve the PTT. > BUT I am still at a loss why one day it was working fine and then the > following days it has stopped. Maybe a line to Tigertronics see if they have > any ideas (Unless they monitor here) > > Regards > > Kevin, ZL1KFM. > > ----- Original Message ----- > From: W4AGA > To: digitalradio@yahoogroups.com > Sent: Wednesday, October 21, 2009 2:43 AM > Subject: [digitalradio] Re: Damm, my SignaLink has Stopped TXing > > > Mine quit too, sorta! It quit TX with MixW MT63 but works fine with RMS > Express. Go figure. > > 73 de W4AGA > > --- In digitalradio@yahoogroups.com, Rick Westerfield <r_lwesterfi...@...> > wrote: > > > > Try installing a very simple program like MixW. If it works there then > the logic dictates that it is the other program. > > > > Rick - KH2DF > > > > Sent from my iPhone > > > > On Oct 19, 2009, at 11:53 PM, "Gmail - Kevin, Natalia, Stacey & > Rochelle" <spar...@...> wrote: > > > > Hi All, > > > > For whatever reason my SignaLink will not TX my TS-480. > > I have pulled all the plugs out and reconnected them. The software HRD w > DM-780, MMSSTV and WinMor are setup for the SignaLink to switch PTT. > > I had everything weeking upto a week ago and nothing (from my > understanding) has changed. > > If I switch DM-780 to use HRD to switch PTT this works well. > > > > TX audio out from the computer is set at 100% and the SignaLink is at 12 > o'clock. > > > > The SignaLink is RXing okay and is decoding everything that comes up. > > I have pulled it apart and there does not appear to be anything dead in > it. > > > > Does anyone have any ideas? > > > > Regards > > > > Kevin. ZL1KFM. > > > > > >