If you have DXKeeper installed then you probably have installed DXLab Launcher as well. If not then download the Launcher from one of DXLab's download sites, http://www.dxlabsuite.com/download.htm , and follow the instructions.
- Once you have the Launcher installed run it and open its Config-Window. -Select the application files for Commander, DXKeeper etc. in the DXLab Applications pane. -Check the Enable-boxes for Commander and DXKeeper. - Select multipsk.exe in one line of the Other Applications pane and check the Enable box. - If you like to start all three applications whenever you start the Launcher check Auto Start in the Config-Window as well. Whenever you like to use all three programs start the Launcher and click on start in the Launcher window or - if you have chosen the Auto Start option- all programs will launch automatically. You should be aware, however, that the Launcher will terminate the DXLab applications when you click on terminate in the Launcher window but not Multipsk. Multipsk needs to be shut down manually. This configuration works very well at my second qth where I use more or less only weak signal modes like Olivia. 73 Juergen, DL8LE --- In digitalradio@yahoogroups.com, Tony <d...@...> wrote: > > All, > > Is there a way to automatically launch both Dxkeeper and > Commander when Multipsk is starts? They work well together > and it would be nice if they launched together. > > Just a thought. > > Tony -K2MO >